標準編號:	GB/T 12534-1990
中文名稱:	汽車道路試驗方法通則
英文名稱:	Motor vehicles－General rules of road test method
中標分類:	T04    基礎標準與通用方法
行業分類:	GB    國家標準
ICS分類:	43.020 43.020    道路車輛綜合 43.020
發布機構:	國家技術監督局
發布日期:	1990-1-2
實施日期:	1991-9-1
標準狀態:	valid
替代舊標準:	GB 1334-1977
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4,000 字
翻譯價格(元):	120.0
交付時間:	付款后 1 個工作日

1 Subject Content and Application Scope This standard specifies commonly-used test conditions in motor road test and preparation work of test vehicles. This standard is applicable to all kinds of motor vehicles. 2 Normative References GB/T 12548 Motor Vehicles-Speedometer and Odometer-Calibration Method GB 7258 Safety Specifications for Power-driven Vehicles Operating on Roads 3 Test Conditions 3.1 Load 3.1.1 Without special provisions, all the loads shall be factory-set maximum load, or let the test vehicles be in the state of factory-set maximum load. 3.1.2 The loaded goods shall be distributed uniformly and fixed firmly, and shall be free from shaking or bumping during the test process. The loading weight shall not be changed because of the change of conditions such as being humid and being lost, so as to ensure the loading weight and the distribution of goods are not changed. 3.1.3 Calculate the passenger’s average weight according to Table 1. It may be replaced by goods of the same weight.