標準編號:	GB/T 3190-2020
中文名稱:	變形鋁及鋁合金化學成分
英文名稱:	Chemical composition of wrought aluminium and aluminium alloys
中標分類:	H60    有色金屬及其合金產品綜合
行業分類:	GB    國家標準
ICS分類:	77.150.10 77.150.10    鋁產品 77.150.10
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2020-03-31
實施日期:	2021-2-1
標準狀態:	valid
替代舊標準:	GB/T 3190-2008 變形鋁及鋁合金化學成分
翻譯語言:	英文
文件格式:	PDF
中文字符數:	45000 字
翻譯價格(元):	470.0
交付時間:	付款后 1 個工作日

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition. In addition to editorial changes, the following main technical changes have been made with respect to GB/T 3190-2008: ——The normative references are modified (see Clause 2; Clause 2 of Edition 2008); ——79 designations are added in and 6 designations are deleted from the table of international four-digit designations and chemical compositions (see 3.1.1; 3.1.1 of Edition 2008); ——29 designations are added in and the designation 2A97 is deleted from the table of domestic four-digit designations and chemical compositions (see 3.1.1; 3.1.1 of Edition 2008); ——The headers of the table of international four-digit designations and chemical compositions and the table of domestic four-digit designations and chemical compositions are modified, and eight columns of elements "Ag", "B", "Bi", "GA", "Li", "Pb", "Sn" and "V" are added (see 3.1.1; 3.1.1 of Edition 2008); ——The control requirements of aluminium and aluminium alloy materials for packaging are added (see 3.1.5); ——The sampling requirements are modified (see 3.2; 3.2 of Edition 2008); ——The requirements for component analysis are modified (see 3.3; 3.3 of Edition 2008); ——The designations and chemical compositions of inactive alloys are added (see Annex A); ——Comparison table of previous designations is modified (see Annex B; Annex A of Edition 2008). This standard was proposed by China Nonferrous Metals Industry Association. This standard is under the jurisdiction of SAC/TC 243 National Technical Committee on Nonferrous Metals of Standardization Administration of China. The previous editions of this standard are as follows: GB/T 3190-1982, GB/T 3190-1996 and GB/T 3190-2008. Chemical composition of wrought aluminium and aluminium alloys 1 Scope This standard specifies the chemical composition of wrought aluminium and aluminium alloys. This standard is applicable to aluminium and aluminium alloy products (sheets, strips, foils, tubes, rods, shapes, wires and forgings, etc.) produced by pressure processing method, as well as ingots and blanks used for them. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 7999 Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 16474 Designation system for wrought aluminium and aluminium alloy GB/T 17432 Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys GB/T 20975 (All parts) Methods for chemical analysis of aluminium and aluminium alloys GB/T 27675 Designation system for aluminium and aluminium alloys composite sheets, strips and foils YS/T 870 Chemical analysis of high purity aluminium—Determination of trace impurities—Inductively coupled plasma mass spectrometry 3 Requirements 3.1 Chemical composition 3.1.1 Designation system for the wrought aluminium and aluminium alloy shall meet the requirements of GB/T 16474. Chemical compositions of the wrought aluminium and aluminium alloy shall be in accordance with those specified in Tables 2, 3 and A.1. The limit values given in Tables 2, 3 and A.1 shall be in accordance with those specified in Table 1. Table 1 Representation of limit values of elements Limit value of element Representation format of limit value a <0.001% 0.000X 0.001%~<0.01% 0.00X or 0.00XX 0.01%~<0.10% Refined aluminium 0.0XX Non-refined aluminium and aluminium alloy 0.0X 0.10%~0.55%b 0.XX >0.55% 0.X, X.X, XX.X a The limit value of the sum of Fe and Si with the designation of 1XXX is represented as 0.XX or 1.XX. b The limit value within the range of 0.30%~0.55% is represented as 0.X0 or 0.X5. 3.1.2 The designation system of composite materials shall meet the requirements of GB/T 27675, and the chemical composition of aluminium alloy materials shall meet the requirements of this standard. 3.1.3 Aluminium and aluminium alloy materials used in food industry shall be controlled to be w(Pb+Hg+Cd+Cr6+)≤0.01% and w(As)≤0.01%. 3.1.4 Aluminium and aluminium alloy materials used in electrical and electronic equipment industry shall be controlled to be w(Pb)≤0.1%, w(Hg)≤0.1%, w(Cd)≤0.01% and w(Cr6+)≤0.1%. 3.1.5 Aluminium and aluminium alloy materials for packaging shall be controlled to be w(Pb+Hg+Cd+Cr6+)≤0.01%. 3.2 Sampling Methods for sampling for analyzing the chemical composition shall meet the requirements of GB/T 17432. 3.3 Component analysis 3.3.1 Conventional analysis is conducted only for the elements with value requirements for those other than the columns of "Al” and "Other” in Tables 2, 3 and A.1. If the mass fractions of elements under unconventional analysis are suspected to exceed the limit values given in this standard, these elements shall be analyzed by the manufacturer. 3.3.2 The chemical composition analysis methods in Tables 2, 3 and A.1 shall meet the requirements of GB/T 20975, GB/T 7999 or YS/T 870. The arbitration analysis method for the chemical composition of designations with "Co" content less than 0.005% or designations with "Al" content not less than 99.90% shall be the method specified in YS/T 870. The arbitration analysis method for “O” content also may be determined through negotiation between the purchaser and the supplier, and that for other chemical compositions shall be the method specified in GB/T 20975. 3.3.3 When the "total" of "others" in Tables 2, 3 and A.1, the analysis value of each element before summation shall be accurate to 0.XX%. 3.3.4 The content of "Al" (≥99.00%) in Tables 2, 3 and A.1 shall be determined by calculation method: ——When the content of "Al" element is greater than or equal to 99.00%~99.90%, by subtracting the sum of all elements under conventional analysis with the mass fraction not less than 0.010% and the metal elements under unconventional analysis suspected of exceeding 0.010% from 100.00%. The value of each element before summation shall be accurate to 0.0X%; ——When the content of "Al" element is greater than 99.90%~99.99%, by subtracting the sum of all elements under conventional analysis with the mass fraction not less than 0.0010% and the metal elements under unconventional analysis suspected of exceeding 0.0010% from 100.00%. The value of each element before summation shall be accurate to 0.0XX%, and the sum total after the summation shall be rounded off to 0.0X%; ——When the content of "Al" element is greater than 99.99%, by subtracting the sum of all elements under conventional analysis with the mass fraction not less than 0.0010% and the metal elements under unconventional analysis suspected of exceeding 0.0010% from 100.00%. The value of each element before summation shall be accurate to 0.00XX%, and the sum total after the summation shall be rounded off to 0.00X%. 3.3.5 The analysis values are judged by using the rounded-off-value comparison method. Rules of rounding off for numerical values shall be as specified in GB/T 8170, and number of rounding off digits shall be consistent with the limit specified in Tables 2, 3 and A.1 in this standard. 3.3.6 The manufacturer shall monitor and analyze the control elements in 3.1.3, 3.1.4 and 3.1.5 to ensure that the control elements meet the requirements. 4 Others 4.1 See Annex A for the designations and chemical compositions of inactive alloys. 4.2 See Annex B for the comparison between the four-digit designations and the previous designations.

Foreword i 1 Scope 2 Normative references 3 Requirements 4 Others Annex A (Normative) Designations and chemical compositions of inactive alloys Annex B (Informative) Comparison between digit designations involved in Table 3 and their previous designations

ICS 77.150.10 H 60 GB 中華人民共和國國家標準 GB/T 3190—2020 代替GB/T 3190—2008 變形鋁及鋁合金化學成分 Chemical composition of wrought aluminium and aluminium alloys 2020-03-31發布 2021-02-01實施 國家市場監督管理總局 國家標準化管理委員會 發布 前言 本標準按照GB/T 1.1—2009給出的規則起草。 本標準代替GB/T 3190—2008《變形鋁及鋁合金化學成分》，與GB/T 3190—2008相比，除編輯性修改外主要技術變化如下： ——修改了規范性引用文件(見第2章，2008年版的第2章)； ——國際四位數字牌號及化學成分表中增加了79個牌號，刪除了6個牌號(見3.1.1，2008年版的3.1.1)； ——國內四位字符牌號及化學成分表中增加了29個牌號，刪除了2A97牌號(見3.1.1，2008年版的3.1.1)； ——修改了國際四位數字牌號及化學成分表和國內四位字符牌號及化學成分表的表頭，增加了“Ag”“B”“Bi”“Ga”“Li”“Pb”“Sn”“V”8個元素欄(見3.1.1，2008年版的3.1.1)； ——增加了包裝用鋁及鋁合金材料的控制要求(見3.1.5)； ——修改了取樣要求(見3.2，2008年版的3.2)； ——修改了成分分析要求(見3.3，2008年版的3.3)； ——增加了不活躍合金的牌號和化學成分(見附錄A)； ——修改了《曾用牌號對照表》(見附錄B，2008年版的附錄A)。 本標準由中國有色金屬工業協會提出。 本標準由全國有色金屬標準化技術委員會(SAC/TC 243)歸口。 本標準所代替標準的歷次版本發布情況為： GB/T 3190—1982、GB/T 3190—1996、GB/T 3190—2008。 變形鋁及鋁合金化學成分 1 范圍 本標準規定了變形鋁及鋁合金的化學成分。 本標準適用于以壓力加工方法生產的鋁及鋁合金加工產品(板、帶、箔、管、棒、型、線和鍛件等)及其所用的鑄錠和坯料。 2 規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 7999 鋁及鋁合金光電直讀發射光譜分析方法 GB/T 8170 數值修約規則與極限數值的表示和判定 GB/T 16474 變形鋁及鋁合金牌號表示方法 GB/T 17432 變形鋁及鋁合金化學成分分析取樣方法 GB/T 20975(所有部分) 鋁及鋁合金化學分析方法 GB/T 27675 鋁及鋁合金復合板、帶、箔材牌號表示方法 YS/T 870 高純鋁化學分析方法 痕量雜質元素含量的測定 電感耦合等離子體質譜法 3 要求 3.1 化學成分 3.1.1 變形鋁及鋁合金牌號表示方法應符合GB/T 16474的規定。變形鋁及鋁合金的化學成分應符合表2、表3、表A.1的規定。表2、表3和表A.1中極限數值表示應符合表1規定。 表1 元素極限數值的表示 元素極限數值 極限數值表示形式a ＜0.001％ 0.000X 0.001％～＜0.01％ 0.00X或0.00XX 0.01％～＜0.10％ 精鋁 0.0XX 非精鋁及鋁合金 0.0X 0.10％～0.55％b 0.XX ＞0.55％ 0.X、X.X、XX.X a 1XXX牌號Fe、Si之和的極限數值表示為0.XX或1.XX。 b 0.30％～0.55％范圍內的極限數值表示為0.X0或0.X5。 3.1.2 復合材料牌號表示方法應符合GB/T 27675的規定，其中的鋁合金材料化學成分應符合本標準的規定。 3.1.3 食品行業用鋁及鋁合金材料應控制w(Pb＋Hg＋Cd＋Cr6＋)≤0.01％、w(As)≤0.01％。 3.1.4 電器、電子設備行業用鋁及鋁合金材料應控制w(Pb)≤0.1％、w(Hg)≤0.1％、w(Cd)≤0.01％、w(Cr6＋)≤0.1％。 3.1.5 包裝用鋁及鋁合金材料應控制w(Pb＋Hg＋Cd＋Cr6＋)≤0.01％。 3.2 取樣 化學成分分析取樣應符合GB/T 17432的規定。 3.3 成分分析 3.3.1 僅對表2、表3、表A.1中“Al”及“其他”欄之外有數值規定的元素進行常規分析。當懷疑非常規分析元素的質量分?jǐn)?shù)超出了本標準的限定值時，生產者應對這些元素進行分析。 3.3.2 表2、表3、表A.1的化學成分分析方法應符合GB/T 20975、GB/T 7999或YS/T 870的規定，“Co”元素含量小于0.005％的牌號或“Al”元素含量不小于99.90％的牌號化學成分仲裁分析應采用YS/T 870規定的方法，“O”元素含量仲裁分析也可供需雙方協商確定，其余化學成分仲裁分析應采用GB/T 20975規定的方法。 3.3.3 計算表2、表3、表A.1中“其他”的“合計”時，求和前各元素分析數值應表示到0.XX％。 3.3.4 表2、表3、表A.1中≥99.00％的“Al”元素含量采用計算法確定： ——當“Al”元素含量≥99.00％～99.90％時，用100.00％減去所有質量分?jǐn)?shù)不小于0.010％的常規分析元素與懷疑超量的非常規分析的金屬元素的和，求和前各元素?cái)?shù)值應表示到0.0X％； ——當“Al”元素含量＞99.90％～99.99％時，用100.00％減去所有質量分?jǐn)?shù)不小于0.0010％的常規分析元素與懷疑超量的非常規分析的金屬元素的和，求和前各元素?cái)?shù)值要表示到0.0XX％，求和后將總和修約到0.0X％； ——當“Al”元素含量＞99.99％時，用100.00％減去所有質量分?jǐn)?shù)不小于0.0010％的常規分析元素與懷疑超量的非常規分析的金屬元素的和，求和前各元素?cái)?shù)值要表示到0.00XX％，求和后將總和修約到0.00X％。 3.3.5 分析數值的判定采用修約比較法，數值修約規則按GB/T 8170的有關規定進行，修約數位應與本標準的表2、表3、表A.1規定的極限數位一致。 3.3.6 生產廠應對3.1.3、3.1.4和3.1.5的控制元素進行監控分析，確保控制元素符合要求。 4 其他 4.1 不活躍合金的牌號和化學成分見附錄A。 4.2 四位字符牌號與曾用牌號的對照關系參見附錄B。 表2 國際四位數字牌號及化學成分 序號 牌號 化學成分(質量分?jǐn)?shù))/％ Si Fe Cu Mn Mg Cr Ni Zn Ti Ag B Bi Ga Li Pb Sn V Zr 其他 Al 單個 合計 余量 注1：表中元素含量為單個數值時，“Al”元素含量為最低限，其他元素含量為最高限。 注2：元素欄中“—”表示該位置不規定極限數值，對應元素為非常規分析元素，“其他”欄中“—”表示無極限數值要求。 注3：“其他”表示表中未規定極限數值的元素和未列出的金屬元素。 注4：“合計”表示不小于0.010％的“其他”金屬元素之和。 a 焊接電極及填料焊絲的w(Be)≤0.0003％。 b 主要用作包覆材料。 c 經供需雙方協商并同意，擠壓產品與鍛件的w(Zr＋Ti)最大可達0.20％。 d 焊接電極及填料焊絲的w(Be)≤0.0005％。 e 硅質量分?jǐn)?shù)為鎂質量分?jǐn)?shù)的45％～65％。 f 經供需雙方協商并同意，擠壓產品與鍛件的w(Zr＋Ti)最大可達0.25％。 g 見相應空白欄中要求。 表3 國內四位字符牌號及化學成分 序號 牌號 化學成分(質量分?jǐn)?shù))/％ 備注 Si Fe Cu Mn Mg Cr Ni Zn Ti Ag B Bi Ga Li Pb Sn V Zr 其他 Al 單個 合計 余量 注1：表中元素含量為單個數值時，“Al”元素含量為最低限，其他元素含量為最高限。 注2：元素欄中“—”表示該位置不規定極限數值，對應元素為非常規分析元素，“其他”欄中“—”表示無極限數值要求。 注3：“其他”表示表中未規定極限數值的元素和未列出的金屬元素。 注4：“合計”表示不小于0.010％的“其他”金屬元素之和。 a “Be”元素均按規定加入，其含量可不做分析。 b 鉚釘線材的w(Zn)≤0.03％。 c 見相應空白欄中要求。 d 以“C”替代“B”時，“C”元素含量應為0.0001％～0.05％。 e 以“C”替代“B”時，“C”元素含量應為0.0001％～0.002％。 附 錄 A (規范性附錄) 不活躍合金的牌號及化學成分 不活躍合金的牌號及化學成分見表A.1。 表A.1 不活躍合金的牌號及化學成分 序號 牌號 化學成分(質量分?jǐn)?shù))/％ Si Fe Cu Mn Mg Cr Ni Zn Ti Ag B Bi Ga Li Pb Sn V Zr 其他 Al 單個 合計 余量 注1：表中元素含量為單個數值時，“Al”元素含量為最低限，其他元素含量為最高限。 注2：元素欄中“—”表示該位置不規定極限數值，對應元素為非常規分析元素，“其他”欄中“—”表示無極限數值要求。 注3：“其他”表示表中未規定極限數值的元素和未列出的金屬元素。 注4：“合計”表示不小于0.010％的“其他”金屬元素之和。 a 焊接電極及填料焊絲的w(Be)≤0.0003％。 b RE表示以Ce、La、Y為主的混合稀土元素。 c RE表示以Ce、La為主的混合稀土元素。 d 見相應空白欄中要求。 附 錄 B (資料性附錄) 表3所涉字符牌號與其曾用牌號對照表 表3所涉字符牌號與其曾用牌號對照表見表B.1。 表B.1 表3所涉字符牌號與其曾用牌號對照表 表3所涉字符牌號 曾用牌號 表3所涉字符牌號 曾用牌號 表3所涉字符牌號 曾用牌號