標準編號:	TSG T7002-2011/XG3-2019
中文名稱:	電梯監督檢驗和定期檢驗規則--消防員電梯，含第3號修改單
英文名稱:	Regulation for lift supervisory inspection and periodical inspection－Traction and positive drive lift, includes Amendment 3
行業分類:	TSG    特種設備安全技術規范
發布機構:	國家質量監督檢驗檢疫總局
發布日期:	2019-10-31
實施日期:	2020-1-1
標準狀態:	valid
替代舊標準:	TSG T7002-2011/XG2-2017 電梯監督檢驗和定期檢驗規則――消防員電梯||含第2號修改單
翻譯語言:	英文
文件格式:	PDF
中文字符數:	38000 字
翻譯價格(元):	2800.0
交付時間:	付款后 1 個工作日

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. In December 2005, the Bureau of Safety Supervision of Special Equipment (hereinafter referred to as Bureau of Special Equipment) of General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China (hereinafter referred to as GAQSIQ) issued the draft assignment of this Regulation to China Special Equipment Inspection and Research Institute. In February 2006, China Special Equipment Inspection and Research Institute organized the relevant experts to establish a drafting group and convened the working conference in Shanghai. At the end of 2006, the drafting group formed a draft for comment. In December 2009, the drafting group, according to the new requirements of TSG 7001-2009 Regulation for lift supervisory inspection and periodical inspection - Firefighter lift, convened conference in Shanghai, revised the regulation and formed a draft standard for approval; on August 8, 2011, GAQSIQ approved and issued this regulation. This Regulation has taken into account the periodical inspection on in-use firefighter lift and supervisory inspection on the processes of installation, renovation and significant repair of traction firefighter lift specified in GB 7588-2003 Safety rules for the construction and installation of electric lifts and GB 50045-95 Code for fire prevention design of high-rise civil buildings, specified the items, inspection content and requirements that must be met of the periodical inspection on in-use firefighter lift and supervisory inspection on the processes of installation, renovation and significant repair of firefighter lift as well as the inspection and test methods and the qualification judgement criteria, defined the format of the inspection report, and specified the verification requirements and methods for the safety of conceal items in the processes of installation, renovation and significant repair as well as the responsibility of the inspection agencies in the inspection process. Chief drafting organizations and staffs of this Regulation: Bureau of Safety Supervision of Special Equipment of General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China He Yi and Xia Yong Guangzhou Academy of Special Equipment Inspection & Testing Wu Xingjun and Mian Zhi Guangdong Special Equipment Inspection Institute Yang Zhaorong Shenzhen Special Equipment Safety Inspection Institute Zhuang Xiaoxiong Beijing Special Equipment Inspection Center Zhao Borui Shanghai Institute of Special Equipment Inspection & Technical Research Qian Hong Shanghai Mitsubishi Elevator Co., Ltd. Xu Weiyu Hitachi Elevator (China) Co., Ltd. Chen Yong and Lu Guoxiong Guangzhou Otis Elevator Co., Ltd. Lin Manqing Contents Regulation for lift supervisory inspection and periodical inspection - Firefighter lift 1 Annex A Contents, requirements and methods for supervisory inspection and periodical inspection of firefighters lifts 10 Annex B Firefighters lift supervisory inspection report 55 Annex C Firefighters Lift Periodical Inspection Report 72 Annex D Special Equipment Inspection Comment Notice 83 Regulation for lift supervisory inspection and periodical inspection - Firefighter lift Article 1 This Regulation is formulated according to Special Equipment Safety Law of the People's Republic of China and Regulations on Safety Supervision over Special Equipment in order to strengthen the supervisory management for the installation, renovation, maintenance, daily maintenance, use and inspection work of firefighter lift, regulate the supervisory inspection and periodical inspection behaviors for installation, renovation and significant repair of firefighter lift, improve the quality of inspection work, promote the operating safety of firefighter lift and guarantee the effective implementation of the work. Article 2 This Regulation is applicable to the supervisory inspection and periodical inspection for installation, renovation and significant repair of firefighter lift. The production (including design, manufacture, installation, renovation, maintenance and daily maintenance of lifts, the same below) and using units of above-mentioned firefighter lift (hereinafter referred to as lifts) as well as Special Equipment Inspection Agencies engaged in lift supervisory inspection and periodical inspection shall comply with this Regulation. Article 3 The supervisory inspection involved in this Regulation refers to the supervisory inspection carried out according to the requirements of this Regulation, for lift installation, renovation and significant repair process by special equipment inspection agencies (hereinafter referred to as inspection agencies) who are approved by General Administration of Quality Supervision, Inspection and Quarantine (hereinafter referred to as GAQSIQ); the periodical inspection involved in this Regulation refers to the inspection conducted by inspection agencies periodically for in-use lifts according to the requirements of this Regulation. The supervisory inspection and periodical inspection (hereinafter referred to as inspection) is the verification inspection for the lift production and using units implementing the relevant laws, regulations and standards, implementing the safety responsibilities and developing the relevant work quality conditions in order to guarantee and independently confirm lift safety. The self-inspection record or conclusion in report of lift production unit is the comprehensive judgment for equipment safety condition; the inspection conclusion in the inspection report issued by inspection agencies is the judgment for such work quality as lift production and using units implementing relevant responsibilities and independently determining equipment safety. Article 4 Where such special circumstances as new technology, new material and new process related to lift production and inspection and affecting the technical index and requirements of this Regulation occur, GAQSIQ may propose the corresponding requirements according to specific circumstances. Article 5 The construction organization who implements lift installation, renovation or significant repair shall apply for supervisory inspection to specified inspection agencies after performing inform as required and before construction commencement (excluding such preparation works as equipment unpacking and field survey); the lift using unit shall apply for periodical inspection to specified inspection agencies one month before the expiration of the next inspection date marked on the safety inspection mark. Article 6 The construction organization shall check such civil works related to lift construction as lift machine room (or machinery equipment room), lift well and landing according to the requirements of design documents and standards, confirm the manufacture quality of lift (including spare parts, safety protection device, etc.), and make record well, and then carry out lift construction after the requirements are met. The construction organization or maintenance organization shall, according to the requirements of relevant safety technical codes and standards, guarantee construction or daily maintenance quality, actually and accurately fill in record or report with respect to construction or daily maintenance, and shall be responsible for construction or maintenance quality as well as the trueness of provided related documents and information and the compliance with physical object. Article 7 The construction organization, maintenance organization and using unit shall provide the relevant documents and information meeting the requirement of Annex A to inspection agencies, and arrange the relevant professional personnel to coordinate with inspection agencies to implement inspection. Thereinto, the self-inspection report of construction, annual self-inspection record or report of daily maintenance shall be submitted with hard copy separately for future reference. Article 8 The inspection agencies shall implement supervisory inspection based on qualified self-inspection carried out in construction organization and implement periodical inspection based on qualified self-inspection of maintenance organization. The implementation of supervisory inspection and periodical inspection shall comply with the following requirements: (I) For lift installation process, the items listed in Annex B shall be inspected according to the inspection contents, requirements and methods specified in Annex A; (II) For lift renovation and significant repair process, the related items involved in renovation and significant repair which are listed in Annex B as well as Annex C (excluding the items involved in the above-mentioned renovation and significant repair), with the inspection contents, requirements and methods meeting Annex A; (III) For in-use lift, the periodical inspection shall be carried out for the items listed in Annex C once per year according to the inspection contents, requirements and methods specified in Annex A; (IV) When the special equipment safety supervision organization receives above 3 times (including) of real name reporting for lift faults within one inspection period and, upon confirmation, the existence of above faults affects the operating safety of the lift, special equipment safety supervision organization may request to carry out annual self-inspection and periodical inspection of maintenance organization in advance; (V) For the lift that the safety technique performance is affected due to natural disaster or equipment breakdown and that has been out of use for more than one year, the inspection shall be carried out according to the requirements of Item (III) of this article before reuse. However, if renovation or significant repair for the lift is to be carried out, the inspection shall be carried out according to the requirements of Item (II) of this article. Article 9 The lift inspection item is divided into three categories, i.e. Categories A, B and C. The inspection procedure of each category is as follows: (I) For Category A item, the inspection agencies examine the provided documents and information according to the corresponding requirements of Annex A and compare it with the inspection results of items corresponding to the self-inspection records and report (hereinafter referred to as self-inspection results), and make judgment for the inspection conclusion according to the requirements of Article 20; if this item is not examined or inspected by inspection agencies, or the examination and inspection conclusions turn out to be unqualified, the construction organization shall not carry out the construction of the next procedure. (II) For Category B item, the inspection agencies examine the provided documents and information according to the corresponding requirements of Annex A, inspect the items and compare it with self-inspection results, and make judgment for the inspection conclusion according to the requirements of Article 20. (III) For Category C item, the inspection agencies examine the provided documents and information according to the corresponding requirements of Annex A, if they consider the documents and information such as self-inspection record or report are intact and effective and have no doubt about the self-inspection result (hereinafter referred to as no doubt about information examination), it may be confirmed as qualified; if documents and information are insufficient, ineffective or there is doubt about the self-inspection result (hereinafter referred to as doubt about information examination), this item shall be inspected according to the inspection method specified in Annex A and the result shall be compared with the self-inspection result, and the judgment shall be made for the inspection conclusion of this item according to the requirements of Article 20. The category of each inspection item is detailed in Annex A, Annex B and Annex C, and the specific inspection methods are detailed in Annex A. Article 10 The inspection agencies shall prepare lift inspection operation instruction document including inspection procedure and inspection flow chart according to the requirements of this Regulation, and shall conduct strict control on lift inspection quality according to the requirements of relevant laws and regulations, this Regulation and inspection operation instruction document, shall be responsible for the correctness of inspection result and inspection conclusion and shall be responsible for inspection work quality. Article 11 The inspection agencies shall uniformly formulate original lift inspection record format and its requirements and formally issue and use in corresponding organization. The original record content shall not be less than that specified in corresponding inspection report (see Annex B and Annex C). If necessary, the separate table or figure shall be given for related items for the convenience of data record and arrangement. Article 12 The inspection agencies shall equip inspection and detection instrument and equipment, measuring instruments and tools meeting the inspection requirements and methods of Annex A of this Regulation. Article 13 The inspector can be engaged in lift inspection works covered by the approved items after obtaining the corresponding qualification certificate issued by GAQSIQ according to the requirements of national relevant special equipment inspector qualification test. The field inspection shall be carried out by at least 2 persons with qualification of lift Inspector or superior; the inspector shall present inspection qualification identification to lift construction organization or using unit (hereinafter referred to as organization under inspection) applying for inspection. During field inspection, the inspector shall not carry out such works as lift repair and adjustment. Article 14 During field inspection, the inspector shall equip and wear necessary protective articles and shall comply with the relevant safety management provisions of the nation as well as those clearly displayed in construction site or by using unit.

Regulation for lift supervisory inspection and periodical inspection - Firefighter lift Annex A Contents, requirements and methods for supervisory inspection and periodical inspection of firefighters lifts Annex B Firefighters lift supervisory inspection report Annex C Firefighters Lift Periodical Inspection Report Annex D Special Equipment Inspection Comment Notice

電梯監督檢驗和定期檢驗規則——消防員電梯 第一條 為了加強消防員電梯安裝、改造、修理、日常維護保養、使用和檢驗工作的監督管理，規范消防員電梯安裝、改造、重大修理監督檢驗和定期檢驗行為，提高檢驗工作質量，促進消防員電梯運行安全保障工作的有效落實，根據《中華人民共和國特種設備安全法》《特種設備安全監察條例》，制定本規則。 第二條 本規則適用于消防員電梯的安裝、改造、重大修理監督檢驗和定期檢驗。 前款所述消防員電梯(以下簡稱電梯)的生產(含電梯的設計、制造、安裝、改造、修理、日常維護保養，下同)和使用單位，以及從事電梯監督檢驗和定期檢驗的特種設備檢驗機構，應當遵守本規則規定。 第三條 本規則所稱監督檢驗，是指由國家質量監督檢驗檢疫總局(以下簡稱國家質檢總局)核準的特種設備檢驗機構(以下簡稱檢驗機構)，根據本規則規定，對電梯安裝、改造、重大修理過程進行的監督檢驗(以下簡稱監督檢驗)；本規則所稱定期檢驗，是指檢驗機構根據本規則規定，對在用電梯定期進行的檢驗。 監督檢驗和定期檢驗(以下統稱檢驗)是對電梯生產和使用單位執行相關法規標準，落實安全責任，開展為保證和自主確認電梯安全的相關工作質量情況的查證性檢驗。電梯生產單位的自檢記錄或者報告中的結論，是對設備安全狀況的綜合判定；檢驗機構出具檢驗報告中的檢驗結論，是對電梯生產和使用單位落實相關責任、自主確定設備安全等工作質量的判定。 第四條 如果出現了有關電梯生產和檢驗的新技術、新材料、新工藝等影響本規則技術指標和要求的特殊情況，國家質檢總局可以根據具體情況，提出相應要求。 第五條 實施電梯安裝、改造或者重大修理的施工單位(以下簡稱施工單位)應當在按照規定履行告知后、開始施工前(不包括設備開箱、現場勘測等準備工作)，向檢驗機構申請監督檢驗；電梯使用單位應當在電梯使用標志所標注的下次檢驗日期屆滿前1 個月，向檢驗機構申請定期檢驗。 第六條 施工單位應當按照設計文件和標準的要求，對電梯機房(或者機器設備間)、井道、層站等涉及電梯施工的土建工程進行檢查，對電梯制造質量(包括零部件和安全保護裝置等)進行確認，并且作出記錄，符合要求后方可以進行電梯施工。 施工單位或者維護保養單位應當按照相關安全技術規范和標準的要求，保證施工或者日常維護保養質量，真實、準確地填寫施工或者日常維護保養的相關記錄或者報告，對施工或者維護保養質量以及提供的相關文件、資料的真實性及其與實物的一致性負責。 第七條 施工單位、維護保養單位和使用單位應當向檢驗機構提供符合附件A要求的有關文件、資料，安排相關的專業人員配合檢驗機構實施檢驗。其中，施工自檢報告、日常維護保養年度自行檢查記錄或者報告還需另行提交復印件備存。 第八條 檢驗機構應當在施工單位自檢合格的基礎上實施監督檢驗，在維護保養單位自檢合格的基礎上實施定期檢驗。實施監督檢驗和定期檢驗，應當遵守以下規定： (一)對于電梯安裝過程，按照附件A 規定的檢驗內容、要求和方法，對附件B所列項目進行檢驗； (二)對于電梯改造和重大修理過程，除對改造和重大修理涉及的附件B 中所列的項目進行檢驗之外，還需對附件C 所列項目(前述改造和重大修理涉及的項目除外)進行檢驗，檢驗的內容、要求和方法按照附件A 的規定； (三)對于在用電梯，按照附件A 規定的檢驗內容、要求和方法，對附件C 所列項目每年進行1 次定期檢驗； (四)對于在1 個檢驗周期內特種設備安全監察機構接到故障實名舉報達到3 次以上(含3 次)的電梯，并且經確認上述故障的存在影響電梯運行安全時，特種設備安全監察機構可以要求提前進行維護保養單位的年度自行檢查和定期檢驗； (五)對于由于發生自然災害或者設備事故而使其安全技術性能受到影響的電梯以及停止使用1 年以上的電梯，再次使用前，應當按照本條第(三)項的規定進行檢驗。 但如果對電梯實施改造或者重大修理，應當按照本條第(二)項的規定進行檢驗。 第九條 電梯檢驗項目分為A、B、C 三個類別。各類別檢驗程序如下： (一)A 類項目，檢驗機構按照附件A 的相應規定，對提供的文件、資料進行審查，對該類項目進行檢驗，并與自檢記錄或者報告對應項目的檢驗結果(以下簡稱自檢結果)進行對比，按照第二十條的規定對項目的檢驗結論做出判定；不經檢驗機構審查、檢驗，或者審查、檢驗結論為不合格，施工單位不得進行下道工序的施工； (二)B 類項目，檢驗機構按照附件A 的相應規定，對提供的文件、資料進行審查，對該類項目進行檢驗，并與自檢結果進行對比，按照第二十條的規定對項目的檢驗結論做出判定； (三)C 類項目，檢驗機構按照附件A 的相應規定，對提供的文件、資料進行審查，認為自檢記錄或者報告等文件和資料完整、有效，對自檢結果無質疑(以下簡稱資料審查無質疑)，可以確認為合格；如果文件和資料欠缺、無效或者對自檢結果有質疑(以下簡稱資料審查有質疑)，應當按照附件A 規定的檢驗方法，對該類項目進行檢驗，并與自檢結果進行對比，按照第二十條的規定對項目的檢驗結論做出判定。 各檢驗項目的類別見附件A、附件B、附件C，具體的檢驗方法見附件A。 第十條 檢驗機構應當根據本規則規定，制定包括檢驗程序和檢驗流程圖在內的電梯檢驗作業指導文件，并且按照相關法規、本規則和檢驗作業指導文件的規定，對電梯檢驗質量實施嚴格控制，對檢驗結果及檢驗結論的正確性負責，對檢驗工作質量負責。 第十一條 檢驗機構應當統一制定電梯檢驗原始記錄格式及其要求，在本單位正式發布使用。原始記錄內容應當不少于相應檢驗報告(見附件B、附件C)規定的內容。必要時，相關項目應當另列表格或者附圖，以便數據的記錄和整理。 第十二條 檢驗機構應當配備能夠滿足本規則附件A 所述檢驗要求和方法的檢驗檢測儀器設備、計量器具和工具。 第十三條 檢驗人員必須按照國家有關特種設備檢驗人員資格考核的規定，取得國家質檢總局頒發的相應資格證書后，方可以從事批準項目的電梯檢驗工作。現場檢驗至少由2 名具有電梯檢驗員或者以上資格的人員進行，檢驗人員應當向申請檢驗的電梯施工或者使用單位(以下簡稱受檢單位)出示檢驗資格標識。現場檢驗時，檢驗人員不得進行電梯的修理、調整等工作。 第十四條 現場檢驗時，檢驗人員應當配備和穿戴必需的防護用品，并且遵守國家有關安全管理規定及施工現場或者使用單位明示的安全管理規定。 第十五條 對電梯整機進行檢驗時，檢驗現場應當具備以下檢驗條件： (一)機房或者機器設備間的空氣溫度保持在5℃～40℃； (二)電源輸入正常，電壓波動在額定電壓值±7％的范圍內； (三)環境空氣中沒有腐蝕性和易燃性氣體及導電塵埃； (四)檢驗現場(主要指機房或者機器設備間、井道、轎頂、底坑)清潔，沒有與電梯工作無關的物品和設備，基站、相關層站等檢驗現場放置表明正在進行檢驗的警示牌； (五)對井道進行了必要的封閉。 特殊情況下，電梯設計文件對溫度、濕度、電壓、環境空氣條件等進行了專門規定的，檢驗現場的溫度、濕度、電壓、環境空氣條件等應當符合電梯設計文件的規定。 對于不具備現場檢驗條件或者繼續檢驗可能造成危險的電梯，檢驗人員可以中止檢驗，但必須向受檢單位書面說明原因。 第十六條 檢驗過程中，檢驗人員應當認真審查相關文件、資料，將檢驗情況如實記錄在原始記錄上(包括已審查文件、資料的名稱及編號)，不得漏檢、漏記。可以使用統一規定的簡單標記，表明“符合”“不符合”“合格”“不合格”“無此項”等； 要求測試數據的項目(即附件A 所述檢驗方法中要求測試數據的項目，下同)必須填寫實測數據；未要求測試數據但有需要說明情況的項目，應當用簡單的文字予以說明，例如“×樓層門鎖失效”；遇特殊情況，可以填寫“因……(原因)未檢”“待檢”“見附頁”等。 原始記錄應當注明現場檢驗日期，有執行本次檢驗的檢驗人員簽字，并且有其中一名檢驗人員的校核簽字。 檢驗機構應當長期保存監督檢驗原始記錄和施工自檢報告。對于定期檢驗原始記錄和日常維護保養年度自行檢查記錄或者報告，檢驗機構應當至少保存2 個檢驗周期。 第十七條 檢驗過程中，如果發現下列情況，檢驗機構應當在現場檢驗結束時，向受檢單位或者維護保養單位出具《特種設備檢驗意見通知書》(見附件D，以下簡稱《通知書》)，提出整改要求： (一)施工或者維護保養單位的施工過程記錄或者日常維護保養記錄不完整； (二)電梯存在不合格項目； (三)要求測試數據項目的檢驗結果與自檢結果存在多處較大偏差，或者其他項目的自檢結果與實物狀態不一致，質疑相應單位自檢能力時； (四)使用單位存在不符合電梯相關法規、規章、安全技術規范的問題。 定期檢驗時，對于存在不合格項目但不屬于按照本規則第二十一條規定直接判定為不合格的電梯，《通知書》中應當要求使用單位在整改完成前及時采取安全措施，對該電梯進行監護使用。 受檢單位或者維護保養單位應當按照《通知書》的要求及時整改，并且在規定的時限內向檢驗機構提交填寫了處理結果的《通知書》以及整改報告等見證資料。 檢驗人員應當對整改情況進行確認，可以根據情況采取現場驗證或者查看受檢單位提供的整改報告等見證資料的方式，確認其是否符合要求。 對于定期檢驗的電梯，如果使用單位擬實施改造或者重大修理進行整改，或者擬做停用、報廢處理，則應當在《通知書》上簽署相應的意見，并且在規定的時限內反饋給檢驗機構，同時按照相關規定，辦理對應的相關手續。 第十八條 檢驗工作(包括第十七條規定的對整改情況的確認)完成后，或者達到《通知書》提出時限而受檢單位未反饋整改報告等見證材料的，檢驗機構必須在10個工作日內出具檢驗報告。檢驗結論為“合格”的，還應當同時出具電梯使用標志。 檢驗報告的內容、格式應當符合本規則的規定(見附件B、附件C)，結論頁必須有檢驗、編制、審核、批準人員的簽字和檢驗機構檢驗專用章或者公章。 檢驗機構、施工和使用單位應當長期保存監督檢驗報告。對于定期檢驗報告，檢驗機構和使用單位應當至少保存2 個檢驗周期。 第十九條 檢驗報告中，檢驗項目的“檢驗結果”和“檢驗結論”應當按照如下要求進行填寫： (一)對于要求測試數據的項目，在“檢驗結果”欄中填寫實測或者計算處理后的數據； (二)對于未要求測試數據的項目，如果經檢驗符合要求，在“檢驗結果”欄中填寫“符合”；如果經檢驗不符合要求，填寫“不符合”； (三)對于C 類項目，如果資料審查無質疑，在“檢驗結果”欄中填寫“資料確認符合”；如果資料審查有質疑，并且進行了現場檢驗，分別按照本條第(一)項或者第(二)項要求填寫相應內容； (四)對于需要說明情況的項目，在“檢驗結果”欄中做簡要說明，難以表述清楚的，在檢驗報告中另加附頁描述，“檢驗結果”欄中填寫“見附頁XX”； (五)對于不適用的項目，在“檢驗結果”欄中填寫“無此項”； (六)“檢驗結論”欄只填寫“合格”“不合格”“—”(表示無此項)等單項結論。 第二十條 各類檢驗項目的合格判定條件如下： (一)A、B 類檢驗項目，審查、檢驗結果符合附件A 中的檢驗要求； (二)C 類檢驗項目，資料審查無質疑并且符合附件A 中的檢驗要求，或者審查、檢驗結果符合附件A 中的檢驗要求。 第二十一條 監督檢驗和定期檢驗的合格判定條件如下： (一)安裝監督檢驗，檢驗項目全部合格，并且經檢驗人員確認相關單位已經針對第十七條第(一)、(三)、(四)項所述問題進行了有效整改； (二)改造或者重大修理監督檢驗，檢驗項目全部合格，或者改造和重大修理涉及的相關檢驗項目全部合格，對于按照定期檢驗規定進行的項目，除了上次定期檢驗后使用單位采取安全措施進行監護使用的C 類項目之外(使用單位繼續對這些項目采取安全措施，在《通知書》上簽署了監護使用的意見)，其他項目全部合格，并且經檢驗人員確認相關單位已經針對第十七條第(一)、(三)、(四)項所述問題進行了有效整改； (三)定期檢驗，檢驗項目全部合格，或者B 類檢驗項目全部合格，C 類檢驗項目應整改項目不超過5 項(含5 項)，相關單位已在《通知書》規定的時限內向檢驗機構提交了整改報告等見證資料，使用單位已經對上述應整改項目采取了相應的安全措施，在《通知書》上簽署了監護使用的意見，并且經檢驗人員確認相關單位已經針對第十七條第(一)、(三)、(四)項所述問題進行了有效整改。 第二十二條 經檢驗，凡不符合本規則第二十一條規定的合格判定條件的電梯，應當判定為“不合格”，檢驗機構應當按照第十八條規定的時限等要求出具檢驗報告。對于檢驗結論為不合格的電梯，受檢單位組織相應整改或者修理后可以申請復檢。第二十三條 檢驗報告只允許使用“合格”“不合格”“復檢合格”“復檢不合格” 四種檢驗結論。 第二十四條 對于判定為“不合格”或者“復檢不合格”的電梯、未執行《通知書》提出的整改要求并且已經超過電梯使用標志所標注的下次檢驗日期的電梯，檢驗機構應當將檢驗結果、檢驗結論及有關情況報告負責設備使用登記的特種設備安全監察機構；對于定期檢驗判定為“不合格”的電梯，檢驗機構還應當告知使用單位立即停止使用。 第二十五條 本規則由國家質檢總局負責解釋。 第二十六條 本規則自2012 年2 月1 日起施行。