1 Scope
This standard specifies the storage site and condition, storage and preservation requirements and inspection in the storage period for the automobile (including motorcycle) parts products.
This standard is applicable to the storage and preservation for automobile parts in the circulation field. Production field and transportation, maintenance enterprises may also refer to the provisions of this standard.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. As all the standards will be revised, each party using this standard shall discuss the possibility of using the latest edition of the following standards.
ZB T08001-90 Auto Parts Inspection Specification
3 Definitions
For the purposes of this standard, the following definitions apply.
3.1 Warehouse: buildings specially for the storage and preservation of goods and materials.
3.2 Freight space: little units for putting the goods within the storage sites.
3.3 Stacking: neat arrangement and piling up of the products.
3.4 Stack type: stacking type of the products.
3.5 Stack bottom: the bottom area of the products stacking.
3.6 Tarpaulin mat: the waterproof material, crosser etc. placed on the stack bottom.
3.7 Tarpaulin covering: covering the products with waterproof materials.
3.8 Stack reversal: moving the stacking whose inventory is large and the bottom has been overstocked for a long time to another position.
Foreword i
1 Scope
2 Normative References
3 Definitions
4 Storage Sites and Conditions
5 Requirements for Storage and Preservation
6 Inspection in Storage Period
