標準編號:	GB/T 40068-2021
中文名稱:	保溫管道用電熱熔套（帶）
英文名稱:	Electrofusion welding sleeve(tape) for thermal insulation pipeline
中標分類:	P46    供熱、采暖工程
行業分類:	GB    國家標準
ICS分類:	91.140.10 91.140.10    中央供熱系統 91.140.10
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2021-05-21
實施日期:	2021-12-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	17000 字
翻譯價格(元):	2000.0
交付時間:	付款后 1 個工作日

GB/T 40068-2021 Electrofusion welding sleeve (tape) for thermal insulation pipeline 1 Scope This standard specifies designation, product forms, specifications and dimensions, requirements, test methods, inspection rules, marking and packaging, transportation and storage of high-density polyethylene (HDPE) electrofusion welding sleeve (tape) for thermal insulation pipelines. This standard is applicable to electrofusion welding sleeves (tapes) intended for joint coating of polyurethane thermal insulation pipeline with external HDPE protection. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 1040.1 Plastics - Determination of tensile properties - Part 1: General principles GB/T 1408.1 Insulating materials - Test methods for electric strength - Part 1: Test at power frequencies GB/T 1633 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) GB/T 3280 Cold rolled stainless steel plate, sheet and strip GB/T 3682.1 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method GB/T 6146 Test method for resistivity of precision resistance alloys GB/T 7141 Plastics - Methods of heat aging GB/T 8804.3 Thermoplastic pipes - Determination of tensile properties - Part 3: Polyolefin pipes GB/T 10612 Industrial plate screens - Thickness below 3 mm - Round and square holes GB/T 18475 Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient GB/T 23257 Polyethylene coating for buried steel pipeline GB/T 29046 Test methods of technical specification for pre-insulated directly buried district heating pipes GB/T 29047 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high-density polyethylene casing pipes GB/T 31838.2 Solid insulating materials - Dielectric and resistive properties - Part 2: Resistive properties (DC methods) - Volume resistance and volume resistivity ISO 6721-1 Plastics - Determination of dynamic mechanical properties - Part 1: General principles ISO 6721-4 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method EN 489 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene NACE RP0303 Standard recommended practice field - Applied heat - Shrinkable sleeves for pipelines: application, performance, and quality control 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 23257, GB/T 29046, GB/T 29047 and the following apply. 3.1 split polyethylene electrofusion welding sleeve electrofusion welding sleeve of a construction type in which the HDPE sleeve (sheet) is split from the electrofusion welding net Note: Split PE electrofusion welding sleeves are divided by substrate structure into seamless type and butt weld type. 3.2 integral plate type polyethylene electrofusion welding sleeve structural member consisting of a HDPE sheet, the inner surface of which is thermal bonded by its girth (ends) and embedded into a special electrofusion welding net by a certain process to form a joint coating material that, as electrically heated, can be fused integrally with the outer casing of thermal insulation pipe to provide waterproof protection 3.3 polyethylene electrofusion welding tape connecting structural member consisting of a HDPE strip which is thermal bonded and embedded in a special electrofusion welding net 3.4 substrate HDPE plate, strip or tube (sleeve) material required for producing electrofusion welding sleeve (tape) 3.5 electrofusion welding net electric heating element which is made of thin-walled nickel and chromium stainless steel plates by mechanical process of high-pressure punching, and is intended for processing electrofusion welding sleeve (tape) and outer casing of pipe 4 Designation

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Designation 5 Product forms, specifications and dimensions 6 Requirements 7 Test methods 8 Inspection rules and items 9 Marking and packaging 10 Transportation and storage