1 Scope
This standard specifies the testing method for network compatibility of (HRPD) (Phase 2) air interface in 800MHz/2GHz Cdma2000 digital cellular mobile communication networks, that is, the testing content for network compatibility of mobile communication terminals (i.e., access terminals, hereinafter refers to as AT), including system access and testing in idle mode, basic function testing, handoff testing, authentication testing, mixed service testing, service performance testing and service application testing in data connection mode.
This standard is applicable to the AT and access network (hereinafter refer to as AN) of the digital cellular mobile communication system for the high rate packet data (HRPD) (phase 2) in 800MHz/2GHz Cdma2000 digital cellular mobile communication networks.
This standard is also applicable to the ATs developed in phase 1 of HRPD since the phase 2 of HRPD has backward compatibility with the phase 1 of HRPD. This standard is applicable to the AT (with 800MHz/2GHz Cdma2000 high rate packet data (HRPD)) that supports UIM card (with R-UIM) and does not support UIM card (ROM-UIM).
Dual-mode hybrid mode and test items that require cdma2000 function services are not applicable for the single-mode AT that only support cdma2000 HRPD (hereafter referred to as HRPD). Dual-mode hybrid mode and test items that require cdma2000 function services are applicable for the dual-mode access terminals (Hybrid AT, hereinafter refer to as dual-mode AT) that support both HRPD service functions and cdma2000 function services.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections), or revisions of do not applicable to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these references indicated below. For undated references, the latest edition applies.
YD/T 1679-2007 Technical Specification for 800MHz/2GHz Cdma2000 Digital Cellular Mobile Communication Network Equipment: High Rate Packet Data (Phase II) Access Terminal
YD/T 1680-2007 Test Method for 800MHz/2GHz Cdma2000 Digital Cellular Mobile Communication Network Equipment High Rate Packet Data (Phase II) Access Terminal
YD/T 1681-2007 Technical Requirements for 800MHz/2GHz Cdma2000 Digital Cellular Mobile Communication Networks: High Rate Packet Data (HRPD) (Phase II) Air Interface
YD/T 1876-2009 Test Methods for 800MHz/2GHz Cdma2000 Digital Cellular Mobile Communication Networks - Signaling Conformance Specification for High Rate Packet Data Air Interface (Phase 2)
3 Abbreviations
For the purposes of this standard, the following abbreviations apply.
AAA Authentication Authorization Accounting
AC Authentication Center
AN Access Network
AT Access Terminal
BSC Base Station Controller
BTS Base Transreceiver Station
CDMA Code Division Multiple Access
CHAP Challenge Handshake Authentication Protocol
DH Diffie Hellman
DMU Dynamic Mobile IP Key Update
FA Foreign Agent
FTP File Transfer Protocol
GPS Global Position System
HA Home Agent
HLR Home Location Register
HRPD High Rate Packet Data
HTTP Hypertext Transfer Protocol
IOTA IP-based Over-the-Air
IP Internet Protocol
LAC Link Access Control
MAC Medium Access Control
MDN Mobile Directory Number
Foreword i
1 Scope
2 Normative References
3 Abbreviations
4 Main Technical Requirements and Testing Methods
5 System Access and Testing in Idle Mode
6 Basic Function Testing in Data Connection Mode
7 Handoff Testing
8 Authentication Testing
9 Mixed Service Testing
10 Service Function Testing
11 Service Application Testing
Bibliography
