Test Methods for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks - Signaling Conformance Specification for High Rate Packet Data Air Interface (Phase 2)
1 Scope
This standard specifies the signaling conformance test content of the 800MHz/2GHz cdma2000 digital cellular mobile communication network high speed packet data (HRPD) (Phase 2) access terminal and access network, including default signaling application, default packet application, flowing protocol, session layer, connection layer, security layer and MAC layer test content.
This standard applies to digital cellular mobile telecommunication system of the Phase 2 technology of high rate packet data (HRPD) of 800MHz/2GHz cdma2000 digital cellular mobile communication network.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections), or revisions of any of these publications do not applicable to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these normative documents indicated below. For undated references, the latest edition applies.
3GPP2 C.S0024-A, Version2.0 cdma2000 Technical requirements for Air Interface of High Rate Packet Data
3GPP2 C.S0044-0 v1.0 cdma2000 Interoperability Specification for Air Interface
3 Abbreviations
For the purposes of this standard, the following abbreviations apply.
AC Access Channel
AN Access Network
AT Access Terminal
ASP Active Set Pilot
CDMA Code Division Multiple Access
CC Control Channel
DH Diffie Hellman
DRC Data Rate Control
FTC Forward Traffic Channel
FTP File Transfer Protocol
MAC Medium Access Control
NA Not Applicable
RAB Reverse Active Bit
RATI Random Access Terminal Identifier
RTC Reverse Traffic Channel
SLP Signaling Link Protocol
SLP-F Signaling Link Protocol - Fragmentation
SLP-D Signaling Link Protocol - Delivery
UATI Unicast Access Terminal Identifier
4 Access Network Test
4.1 Default Signaling Application Tests
4.1.1 Default Signaling Link Protocol Tests
4.1.1.1 SLP Initialization Test
4.1.1.1.1 Definition
This test verifies that upon protocol initialization, the access network sets the reliable-delivery SLP-D packet sequence number equal to 0.
4.1.1.1.2 Test procedure
a) Instruct the access terminal to set up a connection with the access network. Begin recording at the access terminal SLP-D packets received from the access network.
b) Verify that the SequenceNumber field in the SLP-D packet sent by the access network meets the minimum standard as per 4.1.1.1.3.
4.1.1.1.3 Minimum Standard
The SequenceNumber field in the first reliable-delivery SLP-D packet sent by the access network during connection establishment shall be 0.
4.1.1.2 SLP-D Sequence Number Increment Tests
4.1.1.2.1 Definition
This test verifies that the access network increments the sequence number by 1 for each new reliable-delivery SLP-D packet sent to the access terminal and this sequence number wraps around to 0 after reaching 7.
4.1.1.2.2 Test Procedure
1) Instruct the access terminal to set up a connection with the access network and record at the access terminal the SLP-D packets received from the access network.
2) Instruct the access terminal to send a Default Signaling Application ConfigurationRequest message.
3) Record the reliable delivery SLP-D packets associated with the Default Signaling Application ConfigurationResponse message from the access network.
4) Repeat steps 2) and 3), nine times.
5) Verify that consecutive reliable-delivery SLP-D packets sent by the access network meet the minimum standard as per 4.1.1.2.3.
4.1.1.2.3 Minimum Standard
The access network shall increment the SequenceNumber field in the header of consecutive reliable-delivery SLP-D packets by 1 mod 8 as defined in 14.6 of 3GPP2C.S0024-A.
4.1.1.3 Reliable-Delivery SLP-D Packet Acknowledgment Test
4.1.1.3.1 Definition
