標準編號:	YB/T 081-2013
中文名稱:	冶金技術標準的數值修約與檢測數值的判定
英文名稱:	Rule for Rounding Off of Numberical Values and Judgement of Testing Values for Technical Standards of Metallurgy
行業分類:	YB    冶金行業標準
發布機構:	工業和信息化部
發布日期:	2013-4-25
實施日期:	2013-9-1
標準狀態:	valid
替代舊標準:	YB/T 081-1996 冶金技術標準的數值修約與檢測數值的判定原則
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies rules and emphases for rounding off of numberical values and judgement of testing values for technical standards of metallurgy, and the coordination requirements for value rounding interval of indexes or parameters specified in product standards and test method standards. This standard is applicable to the judgement of all kinds of metallurgy technical standards or preparation of relevant documents, and the judgement of testing values or their calculated values. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 228.1-2010 Metallic materials — Tensile testing — Part 1: Method of test at room temperature GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values 3 Terms and Definitions For the purpose of this document, terms and definitions given in GB/T 8170-2008 apply. 4 Rules for Rounding Off of Testing Values or Their Calculated Values for Technical Standards of Metallurgy