標準編號:	TB/T 1484.2-2010
中文名稱:	機車車輛電纜 第2部分：薄壁絕緣電纜
英文名稱:	Specification for cables on board rolling stock - Part 2: Thin wall insulation cables
行業分類:	TB    鐵路運輸行業標準
發布機構:	鐵道部
發布日期:	2010-8-22
實施日期:	2011-2-1
標準狀態:	superseded
被新標準替代:	TB/T 1484.1-2017 機車車輛電纜 第1部分：動力和控制電纜 TB/T 1484.1-2001 鐵路機車車輛電纜訂貨技術條件 第1部分:額定電壓3kV及以下電纜
被替代日期:	2018-1-1
替代舊標準:	TB/T 1484.1-2001 鐵路機車車輛電纜訂貨技術條件 第1部分:額定電壓3kV及以下電纜
翻譯語言:	英文
文件格式:	PDF
中文字符數:	16000 字
翻譯價格(元):	280.0
交付時間:	付款后 1 個工作日

1 Scope This Part specifies the technical requirements, test methods and inspection rules for thin wall insulation cables up to and including 3kV for rolling stock (including multiple units). This Part is applicable to rolling stock (including multiple units), other rail vehicles may also refer to the provisions of this Part. 2 Normative References The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB 252-2000 Light Diesel Fuels GB/T 2900.10-2001 Electrotechnical Vocabulary - Electric Cables (IEC 60050-461:1984, IDT) GB/T 2951.11-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 11: Methods for General Application - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties (IEC 60811-1-1:2001, IDT) GB/T 2951.12-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 12: Methods for General Application - Thermal Ageing Methods (IEC 60811-1-2:1985, IDT) GB/T 2951.13-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 13: Methods for General Application - Measurement for Determining the Density - Water Absorption Tests - Shrinkage Test (IEC 60811-1-3:2001, IDT) GB/T 2951.14-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 14: Methods for General Application - Test at Low Temperature (IEC 60811-1-4:1985, IDT) GB/T 2951.21-2008 Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 21: Methods Specific to Elastomeric Compounds - Ozone Resistance, Hot Set and Mineral Oil Immersion Tests (IEC 60811-2-1:2001, IDT) GB/T 3048.4-2007 Test Methods for Electrical Properties of Electric Cables and Wires - Part 4: Test of DC Resistance of Conductors GB/T 3048.5-2007 Test Methods for Electrical Properties of Electric Cables and Wires - Part 5: Test of Insulation Resistance GB/T 3048.8-2007 Test Methods for Electrical Properties of Electric Cables and Wires - Part 8: AC Voltage Test GB/T 3048.9-2007 Test Methods for Electrical Properties of Electric Cables and Wires - Part 9: Spark Test of Insulated Cores GB/T 3956-2008 Conductors of Insulated Cables (IEC 60228:2004, IDT) GB/T 4909.2-2009 Test Methods for Bare Wires - Part 2: Measurement of Dimensions GB/T 4909.3-2009 Test Methods for Bare Wires - Part 3: Tensile Test GB/T 4909.11-2009 Test Methods for Bare Wires - Part 11: Test for Adherence of Coating GB/T 4910-2009 Tinned Round Copper Wire GB/T 6995 Markings for Electric Wires and Cables GB/T 12528-2008 Rail Vehicle Cables with Rated Voltages up to and Including 3kV GB/T 17650.1-1998 Test on Gases Evolved during Combustion of Materials from Cables - Part 1: Determination of the Amount of Halogen Acid Gas (idt IEE 60754-2:1991) GB/T 17650.2-1998 Test on Gases Evolved during Combustion of Materials from Cables - Part 2: Determination of Degree of Acidity of Gases by Measuring pH and Conductivity (idt IEC 60754-2:1991) GB/T 17651.2-1998 Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 2: Test Procedure and Requirements (idt IEC 61034-2:1997) GB/T 18380.12-2008 Test on Electric and Optical Fibre Cables under Fire Conditions - Part 12: Test for Vertical Flame Propagation for a Single Insulated Wire or Cable - Procedure for 1kW Pre-mixed Flame (IEC 60332-1-2:2004, IDT) GB/T 18380.35-2008 Tests on Electric and Optical Fibre Cables under Fire Conditions - Part 35: Test for Vertical Flame Spread of Vertically-mounted Bunched Wires or Cables - Category C (IEC 60332-3-24:2000, IDT) GB/T 18380.36-2008 Tests on Electric and Optical Fibre Cables under Fire Conditions - Part 36: Test for Vertical Flame Spread of Vertically-mounted Bunched Wires or Cables - Category D (IEC 60332-3-25:2000, IDT) SH/T 0139-1995 Axle Oil EN 50305:2002 Railway Applications - Railway Rolling Stock Cables Having Special Fire Performance - Test Methods 3 Terms and Definitions For the purpose of this document, the following terms and definitions and those specified in GB/T 2900.10-2001 apply. 3.1 Rated voltage The reference voltage for cable construction design and electrical property test, expressed by Uo, in V. Note 1: Uo is the voltage effective value between any insulated conductor and the "ground" (the mental sheath or ambient medium of cable). In AC system, the rated voltage of cable shall be at least equal to the nominal voltage of the system using these cables. While in DC system, the nominal voltage of that system shall not be larger than 1.5 times of the rated voltage of the cable.

Contents Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Cable Classification, Code, Specification and Construction 5 Technical Requirements 6 Electrical Properties 7 Safety Properties 8 Inspection Rules and Methods 9 Delivery Condition 10 Packaging, Transportation and Storage of the Cable Appendix A (Normative) Corona Life Test Method (3kv Class Cable)