標準編號:	TB/T 1484.1-2017
中文名稱:	機車車輛電纜 第1部分：動力和控制電纜
英文名稱:	Specification for cables on board rolling stock-Part 1:Power and control cables
行業分類:	TB    鐵路運輸行業標準
發布機構:	國家鐵路局
發布日期:	2017-06-05
實施日期:	2018-1-1
標準狀態:	superseded
被新標準替代:	TB/T 1484.1-2025 機車車輛電纜 第1部分：動力和控制電纜
被替代日期:	2025-11-1
替代舊標準:	TB/T 1484.1-2010 機車車輛電纜 第1部分：額定電壓3kV及以下標準壁厚絕緣電纜 TB/T 1484.2-2010 機車車輛電纜 第2部分：薄壁絕緣電纜
翻譯語言:	英文
文件格式:	PDF
中文字符數:	52000 字
翻譯價格(元):	3120.0
交付時間:	付款后 1 個工作日

Specification for cables on board rolling stock - Part 1: Power and control cables 1 Scope This part of TB/T 1484 specifies the classification, codes, specifications, structures, technical requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of power and control cables for rolling stocks with rated voltage of 3.6 kV and below. This part is applicable to the power and control cables for rolling stocks (including EMUs) with rated voltage of 3.6 kV and below, and may also serve as a reference for other rail vehicles. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB 252 General diesel fuels GB/T 2900.10-2013 Electrotechnical terminology - Electromagnetic compatibility (IEC 60050-461:2008, IDT) GB/T 2951.11 Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 11: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (GB/T 2951.11-2008, IEC 60811-1-1:2001, IDT) GB/T 2951.12 Common test methods for insulating and sheathing materials of electric and optical cables - Part 12: Methods for general application - Thermal ageing methods (GB/T 2951.12-2008, IEC 60811-1-2:1985, IDT) GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 13: Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test (IEC 60811-1-3:2001, IDT) GB/T 2951.14-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 14: Methods for general application - Test at low temperature (IEC 60811-1-4:1985, IDT) GB/T 2951.21-2008 Common test methods for insulating and sheathing materials of electric and optical - Part 21: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:2001, IDT) GB/T 3048.4 Test methods for electrical properties of electric cables and wires - Part 4: Test of DC resistance of conductors GB/T 3048.5 Test methods for electrical properties of electric cables and wires - Part 5: Test of insulation resistance GB/T 3048.9 Test methods for electrical properties of electric cables and wires - Part 9: Spark test of insulated cores GB/T 4909.2 Test methods for bare wires - Part 2: Measurement of dimensions GB/T 4909.3 Test methods for bare wires - Part 3: Tensile test GB/T 6995.1-2008 Markings for electric wires and cables - Part 1: General requirements GB/T 6995.3 Markings for electric cables and wires - Part 3: Identifications of cables and wires GB/T 11026.1-2003 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001, IDT) GB/T 11026.4 Electrical insulating materials - Thermal endurance properties - Part 4: Ageing ovens - Single-chamber ovens (GB/T 11026.4-2012, IEC 60216-4-1:2006, IDT) GB/T 12528-2008 Rail vehicle cables with rated voltages up to and including 3kV GB/T 17650.1 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas (GB/T 17650.1-1998, IDT IEC 60754-1:1994) GB/T 17650.2 Test on gases evolved during combustion of materials from cables - Part 2: Determination of degree of acidity of gases by measuring pH and conductivity (GB/T 17650.2-1998, IDT IEC 60754-2:1991) GB/T 17651.2 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements (GB/T 17651.2-1998, IDT IEC 61034-2:1997) GB/T 18380.12 Test on electric and optical fibre cables under fire conditions - Part 12: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed flame (GB/T 18380.12-2008, IEC 60332-1-2:2004, IDT) GB/T 18380.35-2008 Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C (IEC 60332-3-24:2000, IDT) GB/T 20637-2006 Electrical installations in ships - Shipboard power cables - General construction and test requirements (IEC 60092-350:2001, IDT) SH/T 0139 Axle oils 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 2900.10-2013 and the following apply. ? 3.1 rated voltage U0 reference voltage for cable structure design and electrical properties test, which is usually the voltage (r.m.s.) between any insulated conductor and "ground" (the metal sheath or surrounding medium of the cable) Note: The rated voltage is expressed in volts. 4 Cable classification 4.1 Classification by insulation structure The cables may be classified by insulation structure into: ——the insulated cables with standard wall thickness, conforming to the nominal insulation thickness in Annex A;

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Cable classification 4.1 Classification by insulation structure 4.2 Classification by rated voltage 4.3 Classification by oil resistance 4.4 Classification by long-term permissible operating temperature 5 Codes 6 Environmental conditions 6.1 Service environment 6.2 Storage environment 7 Specifications 8 Structure 8.1 Conductors 8.2 Insulation 8.3 Cabling 8.4 Shield 8.5 Sheath 9 Technical requirements 9.1 Minimum bending radius 9.2 Physical and mechanical properties 9.3 Electrical properties 9.4 Safety performance 9.5 Service life requirements 10 Inspection methods 10.1 Appearance inspection 10.2 Structural inspection 10.3 Test for physical and mechanical properties 10.4 Test of electrical properties 10.5 Safety performance inspection 11 Inspection rules 11.1 Inspection classification 11.2 End-of-manufacturing inspection 11.3 Type inspection 11.4 Inspection items 12 Marking, packaging, transportation and storage 12.1 Marking 12.2 Packaging 12.3 Transportation and storage Annex A (Normative) Parameter table of cables with common standard wall thickness Annex B (Normative) Parameter table of common cables with small wall thickness Annex C (Normative) Parameter table of common cables with thin wall Annex D (Informative) Product codes Annex E (Informative) Recommended list of conductor structure Annex F (Normative) Dynamic cut-through test Annex G (Normative) Combustion test for cables with a diameter less than or equal to 6 mm Annex H (Normative) Test method for corona life (3.6 kV class cables) Annex I (Normative) Test method for toxicity index Annex J (Normative) Thermal life assessment test Bibliography

機車車輛電纜 第1部分：動力和控制電纜 1 范圍 TB/T 1484的本部分規定了額定電壓3.6kV及以下的機車車輛用動力和控制電纜的分類、代號、規格、結構、技術要求、檢驗方法、檢驗規則、標志、包裝、運輸和儲存。 本部分適用于額定電壓3.6kV及以下的機車車輛(含動車組)用動力和控制電纜，其他軌道車輛可參照?qǐng)?zhí)行。 2 規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB 252 普通柴油 GB/T 2900.10—2013 電工術語 電纜(IEC 60050-461：2008，IDT) GB/T 2951.11 電纜和光纜絕緣和護套材料通用試驗方法 第11部分：通用試驗方法 厚度和外形尺寸測量 機械性能試驗(GB/T 2951.11—2008，IEC 60811-1-1：2001，IDT) GB/T 2951.12 電纜和光纜絕緣和護套材料通用試驗方法 第12部分：通用試驗方法 熱老化試驗方法(CB/T 2951.12—2008，IEC 60811-1-2：1985，IDT) GB/T 2951.13—2008 電纜和光纜絕緣和護套材料通用試驗方法 第13部分：通用試驗方法—密度測定方法—吸水試驗—收縮試驗(IEC 60811-1-3：2001，IDT) GB/T 2951.14—2008 電纜和光纜絕緣和護套材料通用試驗方法 第14部分：通用試驗方法低溫試驗(IEC 60811-1-4：1985，IDT) GB/T 2951.21—2008 電纜和光纜絕緣和護套材料通用試驗方法 第21部分：彈性體混合料專用試驗方法 耐臭氧試驗—熱延伸試驗—浸礦物油試驗(IEC 60811-2-1：2001，IDT) GB/T 3048.4 電線電纜電性能試驗方法 第4部分：導體直流電阻試驗 GB/T 3048.5 電線電纜電性能試驗方法 第5部分：絕緣電阻試驗 GB/T 3048.9 電線電纜電性能試驗方法 第9部分：絕緣線芯火花試驗 GB/T 4909.2 裸電線試驗方法 第2部分：尺寸測量 GB/T 4909.3 裸電線試驗方法 第3部分：拉力試驗 GB/T 6995.1—2008 電線電纜識別標志方法 第1部分：一般規定 GB/T 6995.3 電線電纜識別標志方法 第3部分：電線電纜識別標志 GB/T 11026.1—2003 電氣絕緣材料 耐熱性 第1部分：老化程序和試驗結果的評定(IEC 60216-1：2001，IDT) GB/T 11026.4 電氣絕緣材料 耐熱性 第4部分：老化烘箱 單室烘箱(GB/T 11026.4—2012，IEC 60216-4-1：2006，IDT) GB/T 12528—2008 交流額定電壓3kV及以下軌道交通車輛用電纜 GB/T 17650.1 取自電纜或光纜的材料燃燒時釋出氣體的試驗方法 第1部分：鹵酸氣體總量的測定(GB/T 17650.1—1998，idt IEC 60754-1：1994) GB/T 17650.2 取自電纜或光纜的材料燃燒時釋出氣體的試驗方法 第2部分：用測量pH值和電導率來測定氣體的酸度(GB/T 17650.2—1998，idt IEC 60754-2：1991) GB/T 17651.2 電纜或光纜在特定條件下燃燒的煙密度測定 第2部分：試驗步驟和要求(GB/T 17651.2—1998，idt IEC 61034-2：1997) GB/T 18380.12 電纜和光纜在火焰條件下的燃燒試驗 第12部分：?jiǎn)胃^緣電線電纜火焰垂直蔓延試驗 1kW預混合型火焰試驗方法(GB/T 18380.12—2008，IEC 60332-1-2：2004，IDT) GB/T 18380.35—2008 電纜和光纜在火焰條件下的燃燒試驗 第35部分：垂直安裝的成束電線電纜火焰垂直蔓延試驗 C類(IEC 60332-3-24：2000，IDT) GB/T 20637—2006 船舶電氣裝置 船用電力電纜 一般結構和試驗要求(IEC 60092-350：2001，IDT) SH/T 0139 車軸油 3 術語和定義 GB/T 2900.10—2013界定的以及下列術語和定義適用于本文件。 3.1 額定電壓 rated voltage U0 電纜結構設計和電性能試驗的基準電壓，通常為任一絕緣導體對“地”(電纜的金屬護層或周圍介質)之間的電壓有效值。 注：額定電壓用伏表示。 4 電纜分類 4.1 以絕緣結構區分 按絕緣結構可分為： ——標準壁厚絕緣電纜，符合附錄A的標稱絕緣厚度； ——小尺寸壁厚絕緣電纜，符合附錄B的絕緣厚度； ——薄壁絕緣電纜，符合附錄C的絕緣厚度。 4.2 以額定電壓區分 可分為300V、600V、1800V、3600V電壓等級，其他電壓等級電纜由供需雙方協商確定。 應用在交流系統中，電纜的額定電壓U0不應小于使用電纜的系統的標稱電壓。應用在直流系統中，該系統的標稱電壓(V0)不應大于該電纜額定電壓的1.5倍。