標準編號:	QB/T 1586.3-2010
中文名稱:	箱包五金配件 箱提把
英文名稱:	Hardware fitting of case and bag-Case-handle
中標分類:	Y48    毛皮、皮革與人造革制品
行業分類:	QB    輕工行業標準
ICS分類:	59.140.35 59.140.35    皮革制品 59.140.35
發布機構:	中華人民共和國工業和信息化部
發布日期:	2011-01-21
實施日期:	2011-4-1
標準狀態:	valid
替代舊標準:	QB/T 1586.3-1992 箱包五金配件箱提把
翻譯語言:	英文
文件格式:	PDF
中文字符數:	7,000 字
翻譯價格(元):	280.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of case-handle. This standard is applicable to various case-handles for case and bag. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2912.1-1998 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method) GB/T 17592-2006 Textiles - Determination of the Banned Azo Colourants GB/T 19941 Leather and Fur - Chemical Tests - Determination of Formaldehyde Content (GB/T 19941-2005, ISO/TS 17226: 2003, MOD) GB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants (GB/T 19942-2005, ISO/TS 17234: 2003, MOD) QB/T 2002.1-1994 Technical Conditions of Electroplated Layer of Leather Hardware Fittings QB/T 2921 Case and Bag - Test Method for Fall Down QB/T 2922 Case and Bag - Test Method for Shaking Impact QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS) QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Product Classification 5 Requirements 6 Test Method 7 Inspection Rules 8 Marking, Packaging, Transportation and Storage