1 Scope
This standard specifies the terms, definitions, classification, basic parameters, technical requirements, inspection requirements, marking, packaging, transportation and storage etc. of the lithium-ion phosphate module made of the lithium-ion phosphate battery (≥6A?h).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
JB/T 11137-2011 General Requirement of Lithium-ion Battery Assembly
JB/T 11139-2011 General Requirement of Lithium-ion Manganese Oxide Battery Module
JB/T 11141-2011 General Requirement for Module Case of Lithium-Ion Battery
SJ/T 11364-2006 Marking for Control of Pollution Caused by Electronic Information Products
3 Terms and Definitions
For the purpose of this document, the terms and definitions specified in JB/T 11137-2011 apply.
4 Classification and Models
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Models
4.1 Classification
4.2 Models
4.3 Composition of Lithium-ion Phosphate ion Battery Module
5 Technical Requirements
5.1 Appearance
5.2 Polarity
5.3 Overall Dimension and Mass
5.4 Technical Requirements
5.5 Safety
5.6 Environmental Requirements
5.7 Electromagnetic Compatibility(EMC)
6 Test Methods
6.1 Test Conditions
6.2 Appearance
6.3 Polarity
6.4 Overall Dimension and Mass
6.5 Consistency Test of Lithium-ion Phosphate Battery Module
6.6 Interface and Communication Protocol
6.7 Electric Energy (kW?h) Test
6.8 Service Life Test
6.9 Consumed Peak Power
6.10 Insulation Resistance
6.11 Electromagnetic Compatibility Test
7 Inspection Rules
7.1 Inspection Classification
7.2 Ex-factory Inspection
7.3 Type Test
7.4 Inspection Rules
8 Marking, Packaging, Transportation and Storage
8.1 Marking
8.2 Packaging
8.3 Transportation
8.4 Storage
Appendix A (Informative) Preferred Series of Energy-type Lithium-ion Phosphate Battery Module
Figure 1 Expression Method for Lithium-ion Phosphate Battery Module Model
Table 1 Nominal Voltage and Working Voltage Range of Energy-type Lithium-ion Phosphate Battery Module
Table 2 Nominal Voltage and Working Voltage Range of Power-type Lithium-ion Phosphate Battery Module
Table A.1 Model and Specification of Lithium-ion Phosphate Battery Module (12V Series)
Table A.2 Model and Specification of Energy-type Lithium-ion Phosphate Battery Module (24V Series)
Table A.3 Model and Specification of Energy-type Lithium-ion Phosphate Battery Module (36V Series)
Table A.4 Model and Specification of Energy-type Lithium-ion Phosphate Battery Module (48V Series)
Table A.5 Model and Specification of Energy-type Lithium-ion Phosphate Battery Module (72 V Series)
