標準編號:	JB/T 11137-2011
中文名稱:	鋰離子蓄電池總成通用要求
英文名稱:	General requirement of lithium-ion battery assembly
中標分類:	K81    交支流電源裝置
行業分類:	JB    機械行業標準
ICS分類:	29.220 29.220    電池和蓄電池 29.220
發布機構:	國家標準化委員會 國家質量監督檢驗檢疫總局
發布日期:	2011-5-18
實施日期:	2011-8-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	30000 字
翻譯價格(元):	1020.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the terms and definitions, classification and model designation, requirements, test methods, inspection, marking, packaging, transportation and storage for lithium-ion battery assembly. This standard is applicable to the systems which are composed of lithium-ion battery of 6 A?h or above. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 156-2007 Standard Voltage GB 2893-2008 Safety Colors GB 2894-2008 Safety Signs and Guideline for the Use GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code) GB 4824-2004 Industrial, Scientific and Medical (ISM) Radio-frequency Equipment – Electromagnetic Disturbance Characteristics – Limits and Methods of Measurement GB/T 5465.2-2008 Graphical Symbols for Use on Electrical Equipment – Part 2: Graphical Symbols GB/T 17626.2-2006 Electromagnetic Compatibility – Testing and Measurement Techniques – Electrostatic Discharge Immunity Test GB/T 17626.3-2006 Electromagnetic Compatibility-Testing and Measurement Techniques – Radiated Radio-frequency Electromagnetic Field Immunity Test GB/T 17626.4-2008 Electromagnetic Compatibility – Testing and Measurement Techniques – Electrical Fast Transient/Burst Immunity Test GB/T 17626.5-2008 Electromagnetic Compatibility – Testing and Measurement Techniques – Surge(impact) Immunity Test GB/T 17626.6-2008 Electromagnetic compatibility – Testing and Measurement Techniques – Immunity to Conducted Disturbances Induced by Radio-frequency Fields GB/T 18858.3-2002 Low-voltage Switchgear and Controlgear – Controller-device Interface (CDI) – Part 3: DeviceNet JB/T 11138-2011 Interface and Communication Protocol of Lithium-ion Battery Assembly JB/T 11139-2011 General Requirement of Lithium-ion Manganese Oxide Battery Module JB/T 11140-2011 General Requirement of Lithium-ion Phosphate Battery Module JB/T 11141-2011 General Requirement of Lithium-ion Phosphate Battery Module JB/T 11142-2011 General Requirement of Charging Equipment of Lithium-ion Battery SJ/T 11364-2006 Marking for Control of Pollution Caused by Electronic Information Products 3 Terms and Definitions For the purposes of this document, the following terms and definitions apply.

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Classification and Model Designation 5 Technical Requirements 6 Test Method 7 Inspection 8 Marking, Packaging, Transportation and Storage Appendix A (Normative) Functional Configuration of Lithium-ion Battery Management System Appendix B (Normative) Composition of Lithium-ion Battery Assembly Appendix C (Normative) Discharge Control Mode of Lithium-ion Battery Module and Assembly Appendix D (Informative) Consistency Test Method of Lithium-ion Battery