1 Scope
This standard specifies the terms and definitions, classification and basic parameters, requirements, test methods, inspection rules as well as marking, packaging, transport and storage of the cabs for construction machinery.
This standard is applicable to the cabs of such construction machinery products as excavator, loader, roller, grader, mixer, bulldozer and forklift. The cabs of other construction machinery may make reference to this standard.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Basic Parameters
4.1 Classification
4.2 Basic Parameters and Dimensions
5 Requirements
5.1 Basic Requirements
5.2 Performance requirements
5.3 Safety and Environmental Protection Requirements
5.4 Appearance Requirements
6 Test Methods
6.1 Performance Test
6.2 Safety and Environmental Protection Test
6.3 Appearance Testing
6.4 Other Item Test
7 Inspection Rules
8 Marking, Instruction for Use, Packaging, Transport and Storage
8.1 Marking
8.2 Instruction for Use
8.3 Packaging
8.4 Transport
8.5 Storage
