標準編號:	GB/T 1730-2007
中文名稱:	色漆和清漆 擺桿阻尼試驗
英文名稱:	Paints and varnishes—Pendulum damping test
中標分類:	G50    涂料基礎標準與通用方法
行業分類:	GB    國家標準
ICS分類:	87.040 87.040    涂料和清漆 87.040
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2007-9-11
實施日期:	2008-4-1
標準狀態:	valid
替代舊標準:	GB/T 1730-1993 漆膜硬度測定法 擺桿阻尼試驗
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	720.0
交付時間:	付款后 1 個工作日

1 Scope This standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It specifies standard conditions for carrying out a pendulum damping test on a single coating or a multicoat system of paint, varnish or related product. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition applies. GB/T 308 Rolling bearings - Steel balls (GB/T 308-2002, ISO 3290: 1998, NEQ) GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528: 2000, IDT) GB/T 9271 Paints and varnishes - Standard panels for testing (GB/T 9271-1988, eqv ISO 1514: 1984) GB 9278 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (GB 9278-1988, eqv ISO 3270: 1984) GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-1992, eqv ISO 2808: 1974) GB/T 20777-2006 Paints and varnishes - Examination and preparation of test samples (ISO 1513: 1992, IDT) ASTM D 4366: 1995 Standard test methods for hardness of organic coatings by pendulum damping tests 3 Required supplementary information For any particular application, the test method specified in this International Standard needs to be completed by supplementary information. The items of supplementary information are given in annex A.

Foreword i Introduction iii 1 Scope 2 Normative references 3 Required supplementary information 4 Principle 5 K?nig and Persoz pendulum damping tests (Method A) 6 Double pendulum damping test (Method B) Annex A (Normative) Required supplementary information Annex B (Normative) Calibration of the K?nig pendulum Annex C (Normative) Calibration of the Persoz pendulum Annex D (Normative) Calibration of the double pendulum Annex E (Informative) A complete list of technical deviations between this standard and ISO 1522: 1998, together with their justifications