1 Scope
This part of GB/T 21196 specifies a determination method for abrasion resistance of fabrics by the assessment of the appearance change.
This part is applicable to the fabrics which having a low abrasion wear life, including nonwovens and coated fabrics.
Note: Further introductory comments are given in Part 1 of this Standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 21196. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 250 Grey scale for assessing change in colour (GB 250-1995, idt ISO 105-A02:1993)
GB/T 2828.1 Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, idt ISO 2859-1:1999)
GB 6529 Standard atmospheres for textiles conditioning and testing (GB 6529-1986, neq ISO 139:1973)
GB/T 21196.1 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus (GB/T 21196.1-2007, ISO 12947-1:1998, MOD)
3 Terms and Definitions
For the purposes of this part of GB/T 21196, the terms and definitions given in GB/T 21196.1 apply.
