標準編號:	GB/T 1972-2005
中文名稱:	碟形彈簧
英文名稱:	Disc spring
中標分類:	J26    彈簧
行業分類:	GB    國家標準
ICS分類:	21.160 21.160    彈簧 21.160
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2005-1-13
實施日期:	2005-8-1
標準狀態:	superseded
被新標準替代:	GB/T 1972.2-2023 碟形彈簧 第2部分：技術條件
被替代日期:	2023-12-1
替代舊標準:	GB/T 1972-1992 碟形彈簧
翻譯語言:	英文
文件格式:	PDF
中文字符數:	20000 字
翻譯價格(元):	600.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the structural type, dimension series, technical requirements, test methods, inspection rules and design calculation for disc spring with rectangular section (hereinafter referred to as disc spring). This standard is applicable to the ordinary rectangular section disc spring. This standard is not applicable to the trapezoidal section disc spring, groove shape disc spring and membrane disc spring. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB/ T 224 Determination of Depth of Decarburization of Steel GB/ T 230.1 Metallic Materials-Rockwell Hardness Test Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N, T) [GB/ T 230.1-2004, IS0 6508-1: 1999, Metalllc Materials-Rockwell Hardness, Test-Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N, T), MOD] GB/ T1222 Spring Steels GB/ T 2828.1 Sampling Procedures for Inspection by Attributes-Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-By-Lot Inspection (GB/ T 2828.1-2003, ISO 2859-1: 1999, IDT) GB/ T 3279 Hot-Rolled Spring Steel Sheets GB/T 4340.1 Metallic Materials——Vickers Hardness Test ——Part 1: Test Method (GB/T 4340.1-1999, eqv ISO 6507-1: 1997) YB/ T 5058 Cold-Rolled Spring and Tool Steel Strips 3 Disc Spring Dimension, Parameter Name, Code Number and Unit Disc spring dimension, parameter name, code number and unit shall meet the requirements of Table 1.

Contents Foreword I 1 Scope 2 Normative References 3 Disc Spring Dimension, Parameter Name, Code Number and Unit 4 Structural Type, Product Classification and Dimension Series 5 Technical Requirements 6 Test Methods 7 Inspection Rules 8 Mark, Packing, Transportation and Storage Appendix A (Normative ) Common Disc Spring Dimension Series Appendix B (Informative) Uncommon Disc Spring Dimension Series Appendix C (Informative ) Design Calculation and Application of Disc Spring