1 General
1.1 Scope
This Standard applies to electronic apparatus designed to be fed from the mains, from a supply apparatus, from batteries or from remote power feeding and intended for reception, generation, recording or reproduction respectively of audio, video and associated signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus.
This standard primarily concerns apparatus intended for household and similar general use but which may also be used in places of public assembly such as schools, theatres, places of worship and the workplace. Professional apparatus intended for use as described above is also covered unless falling specifically within the scope of other standards.
This standard concerns only safety aspects of the above apparatus; it does not concern other matters, such as style or performance.
This standard applies to the above-mentioned apparatus, if designed to be connected to the telecommunication network or similar network, for example by means of an integrated modem.
Some examples of apparatus within the scope of this standard are:
—receiving apparatus and amplifiers for sound and/or vision;
—independent load transducers and source transducers;
—supply apparatus intended to supply other apparatus covered by the scope of this standard;
—electronic musical instruments, and electronic accessories such as rhythm generators, tone generators, music tuners and the like for use with electronic or non-electronic musical instruments;
—audio and/or video educational apparatus;
—video projectors;
Note 1: Film projectors, slide projectors, overhead projectors are covered by GB 4706.43 [5] .
—video cameras and video monitors;
—video games and flipper games;
Note 2: Video and flipper games for commercial use are covered by GB 4706.69 [6]
—juke boxes;
—electronic gaming and scoring machines;
Note 3: Electronic gaming and scoring machines for commercial use are covered by GB 4706.69 [6].
—teletext equipment;
—record and optical disc players;
—tape and optical disc recorders;
—antenna signal converters and amplifiers;
—antenna positioners;
—Citizen's Band apparatus;
—apparatus for imagery;
—electronic light effect apparatus;
—apparatus for use in alarm systems;
—intercommunication apparatus, using low voltage mains as the transmission medium;
—cable head-end receivers;
—multimedia apparatus;
Note 4: The requirements of GB 4943.1 may also be used to meet the requirements for safety of multi-media apparatus (see also GB/T 22698 [16])
—professional general use amplifiers, record or disc players, tape players, recorders, and public address systems;
—professional sound/video systems;
—electronic flash apparatus for photographic purposes (see Annex L).
1.1.2 This standard applies to apparatus with a rated supply voltage not exceeding
—250 V a.c. single phase or d.c. supply;
—433 V a.c. in the case of apparatus for connection to a supply other than single-phase.
1.1.3 This standard applies to apparatus for use at altitudes not exceeding 5000 m above sea level, primarily in dry locations and in regions with moderate or tropical climates.
For apparatus with protection against splashing water, additional requirements are given in annex A.
For apparatus to be connected to telecommunication networks, additional requirements are given in annex B.
For apparatus intended to be used in vehicles, ships or aircraft, or at altitudes exceeding 5000 m above sea level, additional requirements may be necessary.
Note: See Table A.2 of GB/T 16935.1.
Requirements, additional to those specified in this standard, may be necessary for apparatus intended for special conditions of use.
1.1.4 For apparatus designed to be fed from the mains, this standard applies to apparatus intended to be connected to a mains supply with transient overvoltages not exceeding overvoltage category II according to GB/T 16935.1.
For apparatus subject to transient overvoltages exceeding those for overvoltage category II, additional protection may be necessary in the mains supply of the apparatus.
1.2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 156 Standard Voltage (GB/T 156-2007, IEC 60038:2002, MOD)
GB/T 193 General Purpose Metric Screw Threads--General Plan (GB/T 193-2003, ISO 261:1998, MOD)
GB/T 1633 Plastics--Thermoplastic Materials--Determination of Vicat Softening Temperature (VST) (GB/T 1633-2000, idt ISO 306:1994)
GB 2099
(all parts) Plugs and Socket-outlets for Household and Similar Purposes (GB 2099.1-2008, IEC 60884-1:2006, MOD; GB 2099.2-1997, eqv IEC 60884-2-2:1989; GB 2099.3-2008, IEC 60884-2-5:1995, MOD; GB 2099.4-2008, IEC 60884-2-3:2006, IDT; GB 2099.5-2008, IEC 60884-2-6:1997, IDT; GB 2099.6-2008, IEC 60884-2-1:2006, IDT)
GB/T 2423.3 Environmental Testing for Electric and Electronic Products--Part 2: Testing Methods--Test Cab: Damp Heat Steady State (GB/T 2423.3-2006, IEC 60068-2-78:2001, IDT)
GB/T 2423.8 Environmental Testing for Electric and Electronic Products--Part 2: Test Methods--Test Ed: Free Fall (GB/T 2423.8-1995, idt IEC 60068-2-32:1990)
GB/T 2423.10 Environmental Testing for Electric and Electronic Products--Part 2: Test Methods--Test Fc: Vibration (Sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6:1995, IDT)
GB/T 2423.55 Environmental Testing for Electric and Electronic Products--Part 2: Test methods--Test Eh: Hammer Tests (GB/T 2423.55-2006, IEC 60068-2-75:1997, IDT)
Foreword i
Introduction ix
1 General
2 Terms and Definitions
3 General Requirements
4 General Test Conditions
5 Marking and Instructions
6 Hazardous Radiations
7 Heating under Normal Operating Conditions
8 Constructional Requirements with Regard to the Protection against Electric Shock
9 Electric Shock Hazard under Normal Operating Conditions
10 Insulation Requirements
11 Fault Conditions
12 Mechanical Strength
13 Clearance and Creepage Distance
14 Components
15 Terminals
16 External Flexible Cords
17 Electrical Connections and Mechanical Fixings
18 Mechanical Strength of Picture Tubes and Protection against the Effects of Implosion
19 Stability and Mechanical Hazards
20 Resistance to Fire
Annex A (Normative) Additional Requirements for Apparatus with Protection against Splashing Water
Annex B (Normative) Apparatus to be Connected to the Telecommunication Networks
Annex C (Normative) Band-Pass Filter for Wide-Band Noise Measurement
Annex D (Normative) Measuring Network for Touch Currents
Annex E (Normative) Measurement of Clearances and Creepage Distances
Annex F (Normative) Table of Electrochemical Potentials
Annex G (Normative) Flammability Test Methods
Annex H (Normative) Insulated Winding Wires for Use without Interleaved Insulation
Annex J (Normative) Alternative Method for Determining Minimum Clearances
Annex K (Normative) Impulse Test Generators
Annex L (Normative) Additional Requirements for Electronic Flash Apparatus for Photographic Purposes
Annex M (Informative) Examples of Requirements for Quality Control Programmes
Annex N (Informative) Routine Tests
Annex P (Informative) Differences between This Edition and GB 8898-2001
Annex Q (Informative) Comparison of Normative References/Bibliography between IEC 60065:2005 and This Standard
Annex R (Normative) Instructions on New Safety Warning Signs in This Standard
Annex S (Informative) Cross-reference of the Examples for Safety-related Instructions Written in Chinese, Tibetan, Mongolian, Zhuang and Uyghur Languages
Bibliography
