標準編號:	YY 0569-2005
中文名稱:	生物安全柜
英文名稱:	Biological safety cabinets
中標分類:	C44    醫用化驗設備
行業分類:	YY    醫藥行業標準
ICS分類:	11.100 11.100    實驗室醫學 11.100
發布機構:	國家食品藥品監督管理局
發布日期:	2005-7-18
實施日期:	2006-6-1
標準狀態:	superseded
被新標準替代:	YY 0569-2011 Ⅱ級 生物安全柜
被替代日期:	2013-6-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	36000 字
翻譯價格(元):	2520.0
交付時間:	付款后 1 個工作日

1 Scope This Standard specifies the terms and definitions, classification, materials, structure and performance requirements, test methods, inspection rules, marks, labels, instructions, packing, transport and storage for safety cabinets. This Standard is applicable to biological safety cabinets (hereinafter referred to as the safety cabinets). 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB/T 191-2000 Packaging-Pictorial Marking for Handling of Goods GB 4793.1-1995 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use-Part 1: General Requirements 3 Terms and Definitions

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Classification 4.1 General 4.2 Class I Safety Cabinet 4.3 Class II Safety Cabinet 4.4 Class III Safety Cabinet 5 Requirements 5.1 Appearance 5.2 Materials 5.3 Construction 5.4 Performance 6 Test Method 6.1 Appearance and Materials 6.2 Structure 6.3 Performance 7 Inspection Rules 7.1 Inspection Type 7.2 Ex-factory Inspection 7.3 Type Inspection 7.4 Installation Inspection 7.5 Maintenance and Inspection 8 Label and Mark 8.1 Product Labeling (Nameplate) 8.2 Package Marks 9 Package, Transport and Storage 9.1 Package 9.2 Transport 9.3 Storage Appendix A (Informative) Installation Recommendation of Class II Safety Cabinet Appendix B (Informative) Recommended Microbiological Decontamination Procedure Appendix C (Normative) Preparation of Bacillus Subtilis Spore Suspension Appendix D (Normative) Nebulizer Selection and Calibration Appendix E (Normative) Potassium iodide (KI) Method Appendix F (Normative) Measurement of Air Volume in Round and Rectangular Ducts Bibliography