標準編號:	YS/T 820.23-2012
中文名稱:	紅土鎳礦化學分析方法 第23部分: 鈷、鐵、鎳、磷、氧化鋁、氧化鈣、氧化鉻、氧化鎂、氧化錳、二氧化硅和二氧化鈦量的測定 波長色散X射線熒光光譜法
英文名稱:	Methods for chemical analysis of laterite nickel ores―Part 23:Determination of cobalt,iron,nickel,phosphorus,aluminium oxide,calcium oxide,chromium oxide,magnesium oxide,manganese oxide,silicon dioxide and titanium dioxide content―Wavelength dispersive
中標分類:	D04    基礎標準與通用方法
行業分類:	YS    有色金屬行業標準
ICS分類:	73.060 73.060    金屬礦 73.060
發布機構:	中華人民共和國工業和信息化部
發布日期:	2012-11-07
實施日期:	2013-3-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	11000 字
翻譯價格(元):	300.0
交付時間:	付款后 1 個工作日

Methods for chemical analysis of laterite nickel ores— Part 23: Determination of cobalt, iron, nickel, phosphorus, aluminum oxide, calcium oxide, chromium oxide, magnesium oxide, manganese oxide, silicon dioxide and titanium dioxide content— Wavelength dispersive X-ray fluorescence spectrometry 1 Scope This part of YS/T 820 specifies the wavelength dispersive X-ray fluorescence spectrometry for the determination of cobalt, iron, nickel, phosphorus, aluminum oxide, calcium oxide, chromium oxide, magnesium oxide, manganese oxide, silicon dioxide and titanium dioxide in laterite nickel ores. This part is applicable to the determination of cobalt, iron, nickel, phosphorus, aluminum oxide, calcium oxide, chromium oxide, magnesium oxide, manganese oxide, silicon dioxide and titanium dioxide content in laterite nickel ores. See Table 1 for the determination range. Table 1 Determination range of each component in laterite nickel ores 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6379.2-2004 Accuracy (trueness and precision) of measurement methods and results—Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994, IDT) GB/T 16597 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods YS/T 820.24-2012 Methods for chemical analysis of laterite nickel ores—Determination of hygroscopic moisture content—Gravimetric method 3 Method summary The test material is melted and cast with flux to form a test material melting piece suitable for measurement by X-ray fluorescence spectrometer. Under the selected instrument measurement conditions, measure the X-ray fluorescence intensity of the characteristic spectral line of the element to be measured in the test material melting piece, calculate it according to the calibration curve or equation, and correct the interference effect between elements to obtain the content of the component to be measured in the sample. 4 Reagents and materials

Foreword i 1 Scope 2 Normative references 3 Method summary 4 Reagents and materials 5 Instruments and equipment 6 Specimen 7 Analytical procedures 8 Precision 9 Test report Annex A (Informative) Preparation of calibration samples Annex B (Informative) Reference working conditions for instruments Annex C (Informative) Calibration equation