1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transport and storage, quality certificates and order (contract) contents of the ilmenite concentrate.
This standard is applicable to ilmenite concentrate which is mainly used for producing high titanium slag, rutile, titanium white, etc., which is obtained from raw ore containing titanium by beneficiation and enrichment.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2007.1 General rules for the sampling and sample preparation of minerals in bulk - Sampling by manual method
GB/T 2007.2 General rules for the sampling and sample preparation of minerals in bulk - Manual method of sample preparation
GB/T 2007.6 General rules for the sampling and sample preparation of minerals in bulk - Determination of moisture content - Heat drying method
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
YS/T 360 (all parts) Methods of chemical analysis for ilmenite concentrate
3 Requirements
3.1 Product classification
Products shall be classified into 10 grades according to their chemical composition.
?
3.2 Chemical composition
The chemical composition of the product shall meet those specified in Table 1 (counted by dry ore grade).
Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Marking, packaging, transport, storage and quality certificate
7 Order (or contract) content
