標準編號:	YD/T 2687-2013
中文名稱:	LTE/CDMA多模終端設備（單卡槽）技術要求及測試方法
英文名稱:	Technical requirement and test method for LTE/CDMA multimode user equipment (single-slot card)
行業分類:	YD    通信行業標準
發布機構:	中華人民共和國工業和信息化部
發布日期:	2013-12-31
實施日期:	2013-12-31
標準狀態:	superseded
被新標準替代:	YD/T 2687-2013/XG1-2016 LTE/CDMA多模終端設備（單卡槽）技術要求及測試方法||含行業標準第1號修改單
被替代日期:	2016-10-22
翻譯語言:	英文
文件格式:	PDF
中文字符數:	118000 字
翻譯價格(元):	14000.0
交付時間:	付款后 1 個工作日

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by and is under the jurisdiction of China Communications Standards Association. Drafting organizations of this standard: Academy of Telecommunication Research of MIIT, China Telecom Group Co., Ltd. and Zhongxing Telecom Equipment (ZTE) Corporation. Chief drafters of this standard: Zhao Zibin, Dai Guohua, Lu Yinchao, Yu Junhua, Guo Gan, Zhang Yufeng, Duo Hao, Lai Zhijing and Lu Ting. Technical Requirements and Test Methods for Multimode User Equipment (Single Card Slot) of LTE/CDMA 1 Scope This standard specifies the technical requirements and test methods of LTE/CDMA multimode user equipment in terms of unique functions, performance, interface, man-machine interface, environment, reliability, electromagnetic compatibility, etc. This standard is applicable to LTE/CDMA multimode user equipment supporting USIM+CSIM application cards. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 4943.1 Information Technology Equipment—Safety—Part 1: General Requirements GB 19484.1 Requirement and Measurement Methods of Electromagnetic Compatibility for 800MHz CDMA Digital Cellular Telecommunications System—Part 1: Mobile Station and Ancillary Equipment GB/T 18287 General Specification of Lithium-ion Cells and Batteries for Mobile Phone GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone YD 1268.1 The Safety Specification and Test Method for Lithium Batteries and Charger YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset YD/T 1558 Technical Requirements of Mobile Station for 800MHz/2GHz cdma2000 Digital Cellular Mobile Telecommunication Network Equipment YD/T 1576 Testing Method of Mobile Station (Including Non Uim Mobile Station) for 800MHz/2GHz cdma2000 Digital Cellular Mobile Telecommunication Network (All Parts) YD/T 1644.1 Human Exposure to Radio Frequency Fields from Hand-held and Body-mounted Wireless Communication Devices—Human Models, Instrumentation, and Procedures—Part 1: Procedure to Determine the Specific Absorption Rate (SAR) for Hand-held Devices Used in Close Proximity to the Ear (Frequency Range of 300MHz to 3GHz) YD/T 1762.1 TD-SCDMA/WCDMA Digital Cellular Mobile Telecommunication Network Technical Requirements for UICC-ME (Cu) Interface—Part 1: Physical, Electrical and Logical Characteristics YD/T 1763.1 TD-SCDMA/WCDMA Digital Cellular Mobile Telecommunication Network Test methods for USIM-ME (Cu) Interface—Part 1: Physical, Electrical and Logical Characteristics YD/T 2348 CDMA Digital Cellular Mobile Telecommunication Network UICC-ME Interface Test Method: Characteristics of the CSIM Application YD/T 2523 CDMA Digital Cellular Mobile Telecommunication Network UICC-ME Interface Test Method: Characteristics of the CCAT Application YD/T 2524 CDMA Digital Cellular Mobile Telecommunication Network UICC-ME Interface Technical Requirement: Characteristics of the CCAT Application YD/T 2525 CDMA Digital Cellular Mobile Telecommunication Network UICC-ME Interface Technical Requirement: Application Characteristics of the CSIM supporting OMH function YD/T 2575 Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunication Network (Phase1) YD/T 2576 Test Method for User Equipment of TD-LTE Digital Cellular Mobile Telecommunication Network (Phase 1) (All Parts) YD/T 2577 Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunications Network (Phase 1) YD/T 2578 Test Method for User Equipment of LTE FDD Digital Cellular Mobile Telecommunication Network (Phase 1) (All parts) YD/T 2581 LTE Digital Cellular Mobile Telecommunication Network Technical Requirements for UICC-ME (Cu) Interface (All Parts) YD/T 2582 LTE Digital Cellular Mobile Communication Network Test Methods for UICC-ME (Cu) Interface (All Parts) YD/T 2583.14 Requirements and Measurement Methods of Electromagnetic Compatibility for Cellular Mobile Telecommunications Equipment—Part 14: LTE User Equipment and Ancillary Equipment 3GPP TS 36.331 Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol Specification 3GPP TS 36.521-3 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Conformance Specification; Radio Transmission and Reception; Part 3: Radio Resource Management (RRM) Conformance Testing 3GPP TS 36.523-1 Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) Conformance Specification; Part 1: Protocol Conformance Specification 3GPP2 C.S0087-A E-UTRAN - cdma2000 HRPD Connectivity and Interworking Air Interface Specification 3GPP2 C.S0095-A Signaling Test Specification for EUTRAN-cdma2000 Connectivity and Interworking 3 Abbreviations For the purposes of this document, the following abbreviations apply. 3GPP 3rd Generation Partnership Project 3GPP2 3rd Generation Partnership Project 2 CDMA Code Division Multiple Access 1x Single Carrier Radio Transmission Technology HRPD High Rate Packet Data eHRPD Evolved High Rate Packet Data TDD Time Division Duplex FDD Frequency Division Duplex LTE Long Term Evolution SAR Specific Absorption Rate UE User Equipment UICC Universal Integrated Circuit Card 4 LTE/CDMA Multimode Terminals LTE/CDMA multimode terminals may be classified into LTE/CDMA single-pass terminal and LTE/CDMA dual-pass terminal. Single-pass terminal only supports circuit domain voice or data service on one network at the same time, and voice service takes precedence over data service; while dual-pass terminal only supports the concurrency of cdma2000 voice and LTE data services at the same time. 5 Technical Requirements for LTE/CDMA Multimode Terminals 5.1 Technical Requirements for cdma2000 Module In addition to the technical requirements for terminal services and functions specified in this standard, the technical requirements for terminal operating in cdma2000 mode in YD/T 1558 apply. 5.2 Technical Requirements for cdma2000 eHRPD Module In addition to the technical requirements for terminal services and functions specified in this standard, the technical requirements for the terminal operating in cdma2000 eHRPD mode in 3GPP2 C.S0087-A apply. 5.3 Technical Requirements for TD-LTE Module In addition to the technical requirements for terminal services and functions specified in this standard, the requirements for TD-LTE module in YD/T 2575 apply. 5.4 Technical Requirements for LTE FDD Module In addition to the technical requirements for terminal services and functions specified in this standard, the requirements for LTE FDD module in YD/T 2577 apply. 5.5 Requirements for LTE/CDMA Multimode Terminal Services and Functions 5.5.1 Terminal types and definitions Terminals referred to in this standard are LTE/CDMA multimode terminals. Functionally, they can be classified as follows: Voice data terminals: User equipment that can support both circuit domain voice service and packet domain bearer service, such as hand-held terminals, etc.; Data terminals: User equipment that do not support circuit domain voice service but support packet domain bearer service, such as MIFL, tablet terminal, data card, CPE, etc. 5.5.2 General services and functions (for voice data terminal only) See YD/T 2307 for general basic services and functional requirements of LTE/CDMA multimode terminals. 5.5.3 PIN protection function When LTE/CDMA multimode terminal is powered on, if the USIM+CSIM application card inserted in the card slot activates the PIN protection function, the terminal shall prompt the user to input the PIN code. 5.5.4 Display requirements The display requirements are as follows: 1) LTE/CDMA multimode terminal shall be able to correctly display the current wireless access technology in standby state, and can distinguish 4G, 3G and 2G; TD-LTE and LTE FDD shall be displayed as the same wireless access technology. —For dual standby terminals, dual signal bars shall be used, that is, 4G and 2G signals are displayed simultaneously; if 4G signal is not available, 3G and 2G signals are displayed. 2) LTE/CDMA multimode terminal shall be able to correctly display the relevant information of the operation network in the standby state. The name requirements shall meet corresponding industry standards and specifications for terminals, and the relevant information of the operation network shall meet the requirements of the Telecommunications Regulations. 3) LTE/CDMA multimode terminal shall be able to display the current networking state when it is in the ON state; 4) LTE/CDMA multimode terminal shall be able to display the current data connected state when it is in the network connected state. 5.5.5 Emergency call function (for voice data terminal only) See the relevant national standards. 5.5.6 System selection requirements 5.5.6.1 Mode selection during ON/coverage recovery After LTE/CDMA multimode terminal is powered on, the standby network shall be selected automatically according to the relevant information stored in the terminal and the card. 5.5.6.2 Mode selection in standby state LTE/CDMA multimode terminal can complete mode switching in LTE/CDMA mode combination according to the cell reselection criterion specified by 3GPP/3GPP2 standard in standby state. 5.5.7 Requirements for cell measurement For LTE/CDMA multimode terminal in idle state; 1) It shall be able to measure the wireless signals of neighbor cells of cdma2000 eHRPD network when the conditions for inter-system cell measurement are met in TD-LTE mode; 2) It shall be able to measure the wireless signals of neighbor cells of cdma2000 eHRPD network when the conditions for inter-system cell measurement are met in LTE FDD mode; 3) It shall be able to measure the wireless signals of neighbor cell of TD-LTE network when the conditions for inter-system cell measurement are met in cdma2000 eHRPD mode; 4) It shall be able to measure the wireless signals of neighbor cells of LTE-FDD network when the conditions for inter-system cell measurement are met in cdma2000 eHRPD mode; 5) It shall be able to measure the wireless signals of neighbor cells of TD-LTE network when the conditions for inter-system cell measurement are met in LTE FDD mode; 6) It shall be able to measure the wireless signals of neighbor cell of LTE FDD network when the conditions for inter-system cell measurement are met in TD-LTE mode; LTE/CDMA multimode terminals in the connected state shall support both periodic and event-based measurements: 1) It shall be able to measure the wireless signals of neighbor cells of cdma2000 eHRPD network according to the network instructions when the conditions for inter-system cell measurement are met in TD-LTE connection mode (optional); 2) It shall be able to measure the wireless signals of neighbor cells of cdma2000 eHRPD network according to the network instructions when the conditions for inter-system cell measurement are met in LTE FDD connection mode (optional); 3) It shall be able to measure the wireless signals of neighbor cells of TD-LTE network according to the network instructions when the conditions for inter-system cell measurement are met in cdma2000 eHRPD mode (optional); 4) It shall be able to measure the wireless signals of neighbor cells of LTE FDD network according to the network instructions when the conditions for inter-system cell measurement are met in cdma2000 eHRPD mode (optional); 5) It shall be able to measure the wireless signals of neighbor cells of TD-LTE network according to the network instructions when the conditions for inter-system cell measurement are met in LTE FDD connection mode; 6) It shall be able to measure the wireless signals of neighbor cells of LTE FDD network according to the network instructions when the conditions for inter-system cell measurement are met in TD-LTE connection mode.

Foreword i 1 Scope 2 Normative References 3 Abbreviations 4 LTE/CDMA Multimode Terminals 5 Technical Requirements for LTE/CDMA Multimode Terminals 5.1 Technical Requirements for cdma2000 Module 5.2 Technical Requirements for cdma2000 eHRPD Module 5.3 Technical Requirements for TD-LTE Module 5.4 Technical Requirements for LTE FDD Module 5.5 Requirements for LTE/CDMA Multimode Terminal Services and Functions 5.6 Interoperability Requirements for LTE/CDMA Multimode Terminals 5.7 Environment and Reliability 5.8 Acoustics Performance 5.9 Battery, Charger and Interface Characteristics 5.10 Requirements for Terminal Card Interface 5.11 Requirements for Electromagnetic Compatibility (EMC) 5.12 Electrical Safety Performance of Mobile Station 5.13 Requirements for Specific Absorption Rate (SAR) 6 Test Method of LTE/CDMA Multimode Terminals 6.1 Test Method in cdma2000 Operating Mode 6.2 Test Method in cdma2000 eHRPD Operating Mode 6.3 Test Method in LTE FDD Operating Mode 6.4 Test Method in TD-LTE Operating Mode 6.5 Test Method of Multimode Terminals 6.6 Test Method of Terminal Card Interface 6.7 Test method of Reliability 6.8 Test Method of Acoustics 6.9 Test Method of Electromagnetic Compatibility 6.10 Test Method of Specific Absorption Rate (SAR) 6.11 Test Method of Battery and Charger 6.12 Battery 6.13 Charger and Interface Characteristics

LTE/CDMA多模終端設備（單卡槽）技術要求及測試方法 1范圍 本標準規定了LTE/CDMA多模終端設備所特有的功能、性能、接口、人機界面、環境、可靠性以及 電磁兼容性等方面的技術要求及測試方法。 本標準適用于支持USIM+CSIM應用卡的LTE/CDMA多模終端設備. 2規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅所注日期的版本適用于本文 件。凡是不注日期的引用文件，其最新版本（包括所有的修改單）適用于本文件。 GB 4943.1 GB 19484.1 GBm8287 GB/T18288 GBZT18289 YD 1268.1 YD/T 1539 YD/T 1558 YDZT 1576 信息技術設備安全第1部分：通用要求 800MHz CDMA數字蜂窩移動通信系統電磁兼容性要求和測量方法 蜂窩電話用鋰離子電池總規范 蜂窩電話用金屬氫化物鐐電池總規范 蜂窩電話用鎘鐐電池總規范 移動通信手持機鋰電池的安全要求和試驗方法 移動通信手持機可靠性技術要求和測試方法 800MHz/2GHz cdma2000數字蜂窩移動通信網設備技術要求移動臺 800MHz/2GHz cdma2000數字蜂窩移動通信網設備測試方法移動臺（含機卡 一體）（所有部分） YD/T 1644.1 手持和身體佩戴使用的無線通信設備對人體的電磁照射——人體模型、儀器 和規程第1部分：靠近耳邊使用的手持式無線通信設備的SAR評估規程（頻率 范圍300MHz ?3GHz） YDfT 1762.1 TD-SCDMA/WCDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端 間Cu接口技術要求第1部分：物理、電氣和邏輯特性 YDfT 1763.1 TD-SCDMA/WCDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端 間Cu接口測試方法第1部分：物理、電氣和邏輯特性 YDZT2348 CDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端間接口測試方法 終端CSIM應用特性 YDZT2523 CDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端間接口測試方法 終端CCAT應用特性 YD/T2524 CDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端間接口技術要求 CCAT應用特性 YD/T2525 CDMA數字蜂窩移動通信網通用集成電路卡（UICC）與終端間接口技術要求 支持OMH功能的CSIM應用特性 甘話：82054513 http://www.ptsn.net.cn YD/T2575 YD/T2576 YD/T2577 YDZT2578 YDrr 2581 TD-LTE數字蜂窩移動通信網終端設備技術要求（第一階段） TD-LTE數字蜂窩移動通信網終端設備測試方法（第一階段）（所有部分） LTE FDD數字蜂窩移動通信網終端設備技術要求（第一階段） LTE FDD數字蜂窩移動通信網終端設備測試方法（第一階段）（所有部分） LTE數字蜂窩移動通信網通用集成電路卡（UICC）與終端間Cu接口技術要求 （所有部分） YD/T 2582 LTE數字蜂窩移動通信網通用集成電路卡（UICC）與終端間Cu接口測試方法 （所有部分） YD/T 2583.14 蜂窩式移動通信設備電磁兼容性要求和測量方法第14部分：LTE用戶設備及 其輔助設備 3GPP TS 36.331 演進通用陸地?zé)o線接入(E-UTRA)；無線資源控制(RRC)；協議規范(Evolved Universal Terrestrial Radio Access (E-UTRA) ; Radio Resource Control (RRC); Protocol specification) 3GPP TS 36.521-3 演進的通用陸地?zé)o線接入：UE 一致性規范；無線收發；無線資源管理一 致性測試(Evolved Universal Terrestrial Radio Access (E-UTRA) ; User Equipment ( UE ) conformance specification; Radio transmission and reception; Part '3: Radio Resource Management (RRM) conformance testing) 3GPP TS 36.523-1 演進的通用陸地?zé)o線接入和數據核心網：UE 一致性測試規范；第1部分： 協議_致性規范(Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC) ; User Equipment (UE) conformance specification; Part 1: Protocol conformance specification) 3GPP2 C.S0087-A E-UTRAN - cdma2000 HRPD連通性和互通空中接口規范(E-UTRAN - cdma2000 HRPD Connectivity and Interworking Air Interface Specification) 3GPP2 C.S0095-A EUTRAN-cdma2000互操作信令測試標準(Signaling Test Specification for EUTRAN-cdma2000 Connectivity and Interworking) 3縮略語 下列縮略語適用于本文件。 3GPP 3rd Generation Partnership Project 第三代合作伙伴計劃 3GPP2 3rd Generation Partnership Projects 第三代合作伙伴計劃2 CDMA Code Division Multiple Access 碼分多址接入 lx Single Carrier Radio Transmission Technology 單載波無線傳輸技術 HRPD High Rate Packet Data 高速分組數據網絡 eHRPD Evolved High Rate Packet Data 演進的高速分組數據網絡 TDD Time Division Duplex 時分雙工 FDD Frequency Division Duplex 頻分雙工 LTE Long Term Evolution 長期演進 SAR Specific Absorption Rate 比吸收率 甘話：82054513 http://www.ptsn.net.cn User Equipment Universal Integrated Circuit Card 4 LTE/CDMA多模終端 LTE/CDMA多模終端可分為ETE/CDMA單通終端、ETE/CDMA雙通終端。單通終端同一時間只3 持在一個網絡上進行電路域語音或數據業務，語音業務優先于數據業務；雙通終端同一時間支主 cdma2000語音和LTE數據業務的并發。 5 LTE/CDMA多模終端技術要求 5.1 cdma2000模塊技術要求 除本標準規定的終端業務和功能技術要求以外，終端工作在cdma2000模式下的技術要求見YI" 1558。 5.2 cdma2000 eHRPD模塊技術要求 除本標準規定的終端業務和功能技術要求以外，終端工作在cdma2000 eHRPD模式下的技術要求』 3GPP2 C.S0087-A。 5.3 TD-LTE模塊技術要求 除本標準規定的終端業務和功能技術要求以外，TD-LTE模塊的要求見YD/T 2575。 5.4 LTEFDD模塊技術要求 除本標準規定的終端業務和功能技術要求以外，LTE FDD模塊的要求見YD/T 2577。 5.5 LTE/CDMA多模終端業務與功能要求 5.5.1終端類型和定義 本標準中所指終端均指LTE/CDMA多模終端。從功能上可進行以下分類： 語音數據類終端：既能支持電路域語音業務，也能支持分組域承載業務的終端設備，如手持終端等 數據類終端：不支持電路域語音業務，支持分組域承載業務的終端設備，如MIFL平板終端，數步 卡，CPE等。 5.5.2通用業務和功能(僅適用于語音數據終端) LTE/CDMA多模終端的通用基本業務和功能要求見YD/T 2307. 5.5.3 PIN碼保護功能 LTE/CDMA多模終端開機時，如果插入卡槽中的USIM+CSIM應用卡激活了PIN碼保護功能, 應提示用戶輸入PIN碼。 5.5.4顯示要求 顯示要求如下： 1) LTE/CDMA多模終端在待機狀態下應能夠正確顯示當前的無線接入技術，能夠正確區分4G、 和2G；且TD-LTE和LTE FDD應顯示為同一種無線接入技術。 一對于雙待終端，應釆用雙信號欄形式，即同時顯示4G和2G信號；如果無4G信號, 和2G信號。 2) LTE/CDMA多模終端在待機狀態下，應能夠正確顯示運營網絡相關信息。 名稱要求見相應的終端行標規范，運營網絡相關信息應符合《電信條例》要求。? 3） LTE/CDMA多模終端在開機狀態下，應能夠顯示當前的聯網狀態； 4） LTE/CDMA多模終端在網絡連接狀態下，應能夠顯示當前數據連接狀態。 5.5.5緊急呼叫功能（僅適用于語音數據終端） 見國家相關標準的規定。 5.5.6系統選擇要求 5.5.6.1開機/恢復覆蓋時的模式選擇 LTE/CDMA多模終端開機后，應根據終端和卡中存儲的相關信息正確自動選擇待機的網絡。 5.5.6.2待機狀態下的模式選擇 LTE/CDMA多模終端在待機狀態下，可依據3GPP/3GPP2標準規定的小區重選準則在LTE/CDMA模 式組合內完成模式的轉換。 5.5.7小區測量要求 空閑狀態下的LTE/CDMA多模終端： 1） 應能在TD-LTE模式下滿足系統間小區測量的條件時,支持對cdma2000 eHRPD網絡的鄰小區無 線信號進行測量； 2） 應能在ETE FDD模式下滿足系統間小區測量的條件時，支持對cdma2000 eHRPD網絡的鄰小區 無線信號進行測量； 3） 應能在cdma2000eHRPD模式下滿足系統間小區測量的條件時,支持對TD-LTE網絡的鄰小區無 線信號進行測量； 4） 應能在cdma2000 eHRPD模式下滿足系統間小區測量的條件時，支持對LT&FDD網絡的鄰小區 無線信號進行測量； 5） 應能在LTE FDD模式下滿足系統間小區測量的條件時，支持對TD-LTE網絡的鄰小區無線信號 進行測量； 6） 應能在TD-LTE模式下滿足系統見小區測量的條件時，支持對LTE FDD網絡的鄰小區無線信號 進行測量。 連接狀態下的LTE/CDMA多模終端應同時支持周期性和基于事件的測量： 1） 應能在TD-ETE連接態模式下滿足系統間小區測量的條件時，依據網絡指示對cdma2000 eHRPD 網絡的鄰小區無線信號進行測量（可選）； 2） 應能在LTEFDD連接態模式下滿足系統間小區測量的條件時，依據網絡指示對cdma2000 eHRPD 網絡的鄰小區無線信號進行測量（可選）； 3） 應能在cdma2000 eHRPD模式下滿足系統間小區測量的條件時，依據網絡指示對TD-ETE網絡的 鄰小區無線信號進行測量（可選）； 4） 應能在cdma2000 eHRPD模式下滿足系統間小區測量的條件時，依據網絡指示對LTE FDD網絡 的鄰小區無線信號進行測量（可選）； 5） 應能在LTE FDD連接態模式下滿足系統間小區測量的條件時，依據網絡指示對TD-LTE網絡的 鄰小區無線信號進行測量； 6） 應能在TD-LTE連接態模式下滿足系統見小區測量的條件時，依據網絡指示對LTE FDD網絡的 鄰小區無線信號進行測量。 5.5.8小區重選要求 空閑狀態下的LTE/CDMA多模終端： 1） 應能在TD-LTE模式下滿足系統間小區重選的條件時，支持重選到cdma2000 eHRPD無線接入;; 式的小區上； 2） 應能在LTE FDD模式下滿足系統間小區重選的條件時，支持重選到cdma2000 eHRPD無線接」 方式的小區上； 3） 應能在cdma2000 eHRPD模式下滿足系統間小區重選的條件時，支持重選到TD-LTE無線接入7 式的小區上； 4） 應能在cdma2000eHRPD模式下滿足系統間小區重選的條件時，支持重選到LTE FDD無線接丿 方式的小區上； 5） 應能支持LTE FDD和TD-ETE間的小區重選； 6） 應能支持周期性的（依據各廠商實際設定值為準）進行最優系統選擇，具體實現要求見3GPP C.S0016： —最優系統優先級排序：LTE>CDMA? 5.5.9小區切換要求 連接狀態下的LTE/CDMA多模終端： 1） 應能在TD-LTE模式下滿足系統間小區切換的條件時，支持依據網絡指示PS切換到cdma200 eHRPD無線接入方式的小區上（可選）； 2） 應能在LTEFDD模式下滿足系統間小區切換的條件時，支持依據網絡指示PS切換到cdma20。 eHRPD無線接入方式的小區上（可選）； 3） 應能在cdma2000 eHRPD模式下滿足系統間小區切換的條件時，支持依據網絡指示PS切換呂 TD-LTE無線接入方式的小區上（可選）； 4） 應能在cdma2000 eHRPD模式下滿足系統間小區切換的條件時，支持依據網絡指示PS切換3 ETE FDD無線接入方式的小區上（可選）； 5） 應能支持LTEFDD和TD-ETE間的小區切換（可選）。 5.5.10小區重定向要求 連接態下的LTE/CDMA多模終端： 1） 應能在TD-LTE模式下滿足系統間小區重定向的條件時，依據網絡指示完成到cdma2000eHRP] 小區的重定向； 2） 應能在LTE FDD模式下滿足系統間小區重定向的條件時,依據網絡指穴完成到cdma2000 eHRP] 小區的重定向； 3） 應能在cdma2000 eHRPD模式下滿足系統間小區重定向的條件時，支持依據網絡指示完成生 TD-LTE無線接入方式小區的重定向（可選）； 4） 應能在cdma2000 eHRPD模式下滿足系統間小區重定向的條件時，支持依據網絡指示完成到: LTEFDD無線接入方式小區的重定向（可選）； 5） 應能支持ITE FDD和TD-ETE模式間的重定向。