Test method for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment-High data rate packet data (Phase 2) - Access terminal
1 Scope
This standard specifies test methods for aspects such as function, performance of each layer, environmental adaptability, lifetime, power supply and charger, appearance and assembly of high rate packet data (Phase 2) access terminal of 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network.
It is applicable to 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal supporting UIM card (removable) and not supporting UIM card (integrated). For 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal supporting UIM card, all the items in this standard apply; for 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal not supporting UIM card, the test items involving UIM card and UIM interface do not apply.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements
GB/T 18287 General Specification of Lithium-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
GB 19484.1 Requirement and Measurement Methods of Electromagnetic Compatibility for 800MHz CDMA Digital Cellular Telecommunications Systems - Part 1: Mobile Station and Ancillary Equipment
YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment
YD/T 1168 The Technical Requirement of User Identify Module (UIM) for 800MHz CDMA Digital Cellular Mobile Telecommunication Network
YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1583 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Upper Layer (Layer 3) Signaling of Air Interface Specification
YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment
YD/T 1597.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz cdma2000 Digital Cellular Mobile Communications System - Part 1: User Equipment and Ancillary Equipment
YD/T 1679 Technical Requirements for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Network Equipment - High Rate Packet Data (Phase 2) - Access Terminal
YD/T 1681 Technical Requirements for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks - High Rate Packet Data (HRPD) (Phase II) - Air Interface
YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
3GPP2 C.S0029 Test Application Specification (TAS) for High Rate Packet Data Air Interface
3GPP2 C.S0033-Av2.0 Recommended Minimum Performance Standards for cdma2000 High Rate Packet Data Access Terminal
3 Abbreviations and Symbols
3.1 Abbreviations
For the purposes of this document, the following abbreviations apply.
Foreword i
1 Scope
2 Normative References
3 Abbreviations and Symbols
3.1 Abbreviations
3.2 Symbols
4 Functional Test for Access Terminal
5 Physical Layer Performance Test
5.1 Methods of Measurement for Receiver
5.2 Transmitter Test
6 MAC Layer Minimum Standards
6.1 Control Channel Supervision
6.2 Data Rate Control Performance
6.3 Demodulation of Forward Traffic Channel during Soft Handoff
6.4 Supervision Procedures in Variable Rate State
6.5 Access Probes Output Power
6.6 Reverse Traffic Channel Initial Transmit Power
6.7 Reverse Traffic Channel Transmit Power
6.8 Reverse Traffic Channel MAC Rate Transition Probabilities
6.9 Maximum Traffic-to-Pilot Power Ratio
7 Minimum Standards of Connection Layer Performance
7.1 Idle Handoff in Continuous Operation Mode
7.2 Idle Handoff in Slotted Operation Mode
7.3 Neighbor Set Pilot Detection and Incorrect Detection in Soft Handoff
7.4 Candidate Set Pilot Detection and Incorrect Detection in Soft Handoff
7.5 Active Set Pilot Loss Detection in Soft Handoff
7.6 Hard Handoff to Another Frequency
8 Environmental Adaptability Requirements and Tests for Access Terminal
9 Test for Standby Time and Conversation Time for Access Terminal
10 Requirements and Test for Access Terminal Card Interface
11 Electrical Safety Test
12 Electromagnetic Compatibility Test
13 Test for SAR
14 Content Requirements for Access Terminal Card (with R-UIM) Compared With That (without UIM)
15 Power Supply and Charger Test for Access Terminal
16 Appearance, Packaging and Assembling Test
Annex A (Normative) Standard Test Conditions
Annex B (Normative) Confidence Interval
Annex C (Normative) HRPD Equations
Annex D (Normative) HRPD Tolerances
