標準編號:	YB/T 9256-1996
中文名稱:	鋼結構、管道涂裝技術規程
英文名稱:	Specification for the Painting Work Technology of Steel Structure and Pipe
中標分類:	A29    材料防護
行業分類:	YB    冶金行業標準
ICS分類:	25.220 25.220    表面處理和涂覆 25.220
發布日期:	1996-11-7
實施日期:	1997-7-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	22,000 字
翻譯價格(元):	700.0
交付時間:	付款后 1 個工作日

1.0.1 This specification is formulated with a view to guaranteeing the quality of steel structure, nonstandard equipment and pipe painting work, and minimize or prevent the loss arising from corrosion. 1.0.2 This specification is applicable to the painting work design, construction and acceptance for steel structure, nonstandard equipment and pipe (hereinafter referred to as "steel structure") of newly-built, extended and rebuilt works. 1.0.3 This specification is applicable to the painting method which utilizes the coating action of the paint to prevent steel structure corrosion. 1.0.4 This specification is applicable to the painting work with service temperature below 400℃, and the painting work with service temperature above 400℃ shall comply with the design requirements. 1.0.5 New painting technology and material shall be provided with test and trial use and may not be adopted until good effect is proved and the examination and approval by the relevant department is obtained. 1.0.6 The construction of painting work shall meet not only the requirements of this specification, but also those of the current relevant regulations and standards of the nation.

1 General Provisions 2 Steel Surface Pretreatment before Painting 2.1 General Requirements 2.2 Injection Derusting 2.3 Chemical Derusting 2.4 Manual and Power Tool Derusting 2.5 Frame Derusting 2.6 Rust Grade and Derusting Grade of Steel Surface 3 Paints 4 Painting Design 4.1 Classification of Corrosive Environment 4.2 Painting Protection System 4.3 Color of Painting Work 4.4 Pipe Colors and Marks 5 Painting Construction 5.1 General Requirements 5.2 Painting Construction Method 5.3 Surface Treatment and Repair for Secondary Painting 6 Safety Technique 7 Quality Inspection and Acceptance 7.1 Quality Inspection 7.2 Work Acceptance 8 Buried Pipe Anticorrosion 8.1 General Requirements 8.2 Pipe Corrosion Grade and Anticorrosive Coating Type 8.3 Anticorrosive Coating Structure 8.4 Construction of Anticorrosive Coating 8.5 Quality Inspection 8.6 Work Acceptance Appendix A Construction Mix Proportion and Process Conditions Appendix B Coating Protection System and Color Cards Appendix C Asphalt Quality Indexes Additional Explanation