標準編號:	TB/T 2943.2-2007
中文名稱:	機車車輛車鉤組件 第2部分:13A型車鉤防跳上鎖銷組成技術條件
英文名稱:	Couplers components for railway locomotive and vehicle Part 2:Specification of anticreep top locklift assembly for No.13A type coupler
中標分類:	S31    車鉤與緩沖裝置
行業分類:	TB    鐵路運輸行業標準
ICS分類:	45.060.01 45.060.01    鐵路車輛綜合 45.060.01
發布日期:	2007-08-13
實施日期:	2007-12-1
標準狀態:	superseded
被新標準替代:	TB/T 456.2-2019 機車車輛自動車鉤緩沖裝置 第2部分：自動車鉤及附件
被替代日期:	2020-7-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	160.0
交付時間:	付款后 1 個工作日

1 Scope This part of TB/T 2943 specifies the manufacturing technology requirements, test methods, inspection rules, marking, packaging, transportation and storage of anticreep top locklift assembly for No.13A type and No.13 couplers for railway freight car. This part is applicable to the manufacture and inspection of anticreep top locklift assembly for No.13A type and No.13 couplers and its components. 2 Normative References The following standards contain provisions which, through reference in this part of TB/T 2943, constitute provisions of this part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the latest editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature (GB/T 228-2002, eqv ISO 6892: 1998) GB/T 229 Metallic Materials - Charpy Notch Impact Test (GB/T 229-1994, eqv ISO 148: 1983) GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (GB/T 231.1-2002, eqv ISO 6506-1: 1999) GB/T 5117-1995 Carbon Steel Covered Electrodes GB/T 5118-1995 "Low Alloy Steel Covered Electrodes" GB/T 6414-1999 Castings--System of Dimensional Tolerances and Machining Allowances(eqv ISO 8062: 1994) HG/T 2453-1993 Alkyd Varnish TB/T 2942-1999 Specification of Purchase and Acceptance of Steel Castings for Railway 3 Technical Requirements 3.1 Basic requirements 3.1.1 The anticreep top locklift assembly consists of top lock lift, top lock pin, top lock pin lever, etc. Each component shall be manufactured according to the drawings which are approved according to this part and established procedures. 3.1.2 The casting dimensional tolerance unnoted in the product drawing shall meet the requirements of CT7 specified in GB/T 6414-1999. 3.2 Chemical components 3.2.1 The chemical compositions of the castings shall meet the requirements specified in Table 1.

Foreword II 1 Scope 2 Normative References 3 Technical Requirements 4 Test Methods and Test Rules 5 Marking 6 Quality Certificate 7 Storage and Transportation