標準編號:	TB/T 1718-2003
中文名稱:	鐵道車輛輪對組裝技術條件
英文名稱:	Technical requirements of railway vehicles wheelset installation
中標分類:	S33    走動部分
行業分類:	TB    鐵路運輸行業標準
ICS分類:	45.060.20 45.060.20    車輛 45.060.20
發布日期:	2003-5-19
實施日期:	2003-12-1
標準狀態:	superseded
被新標準替代:	TB/T 1718.2-2017 機車車輛輪對組裝 第2部分：車輛
被替代日期:	2017-12-1
替代舊標準:	TB/T 1718-1991
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	420.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the technical requirements, acceptance, marking, coating and protection for wheelset installation. This standard is applicable to the installation of railway vehicle's newly-made wheel and axle, but not applicable to the installation of power track vehicle wheelset and oiling press fitting wheelset. Any special requirement about wheelset installation shall be indicated on the product drawings and technical requirements. 2 Normative References The following normative documents contain provision which, through reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments to (excluding corrigendum contents), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

Contents 1 Scope 2 Normative References 3 Technical Specifications of Spare Parts 4 Technical Requirements of Wheelset Installation 5 Inspection and Acceptance 6 Marking, Coating and Protection Appendix A (Normative) Wheelset Installation Pressure Curve and Explanation