標準編號:	SH/T 0734-2003
中文名稱:	聚合物改性道路瀝青
英文名稱:	Polymer modified asphalt cement for use in pavement construction
中標分類:	E43    石油瀝青
行業分類:	SH    石油化工行業標準
ICS分類:	75.140 75.140    石蠟、瀝青材料和其他石油產品: 75.140
發布機構:	中華人民共和國國家發展和改革委員會
發布日期:	2004-1-9
實施日期:	2004-6-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	360.0
交付時間:	付款后 1 個工作日

Polymer modified asphalt cement for use in pavement construction 1 Scope This standard specifies the requirements for classification, technical conditions, storage and transportation of polymer modified asphalt cement for use in pavement construction. This standard is applicable to polymer modified asphalt cement made of styrene-butadiene-styrene block copolymer (SBS), styrene butadiene rubber (SBR), ethylene-vinyl acetate copolymer (EVA) and polyethylene (PE) as modified admixture materials. For the purpose of other polymer modified asphalt cements meeting the series indexes of this standard, this standard can serve as a reference. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or Modification of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references the latest edition of the normative document applies. GB/T 267 Petroleum products - Determination of flash and fire points - Open cup GB/T 4507 Standard test method for softening point of bitumen GB/T 4508 Standard test method for ductility of bitumen GB/T 4509 Standard test method for penetration of bitumen GB/T 5304 Asphalt thin-film oven test method GB/T 11147 Asphalt sampling method GB/T 11148 Test method for solubility of asphalt SH 0164 Petroleum and related products packaging, storage, transportation and acceptance of delivery rules SH/T 0735-2003 Standard test method for toughness and tenacity of bitumen SH/T 0736-2003 Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test) SH/T 0737-2003 Standard test method for elastic recovery of bituminous materials by ductilometer SH/T 0738-2003 Standard test method for solubility of polymer-modified asphalt materials in 1 1 1-trichloroethane SH/T 0739-2003 Standard test method for viscosity determination of unfilled asphalt using the Brookfield thermose l apparatus SH/T 0740-2003 Standard test method for separation of polymer modified asphalt 3 Terms and definitions 3.1 styrene-butadiene-styrene block copolymer a thermoplastic elastomer, classified in two categories: linear (non-crosslinked) one and star class (crosslinked) one, both of which can be used for asphalt modification 3.2 styrene butadiene rubber amorphous elastomer copolymerized by butadiene and styrene and with randomly distributed links, which is elastic after vulcanization. For the purpose of this standard, it refers to raw rubber synthesized by emulsion method and not vulcanized 3.3 ethylene-vinyl acetate copolymer resin made by copolymerization of ethylene and vinyl acetate Such commonly used products are ones produced by high-pressure bulk polymerization. 3.4 polyethylene Ethylene monomer is homopolymerized under different production conditions. Low density polyethylene polymerized at high pressure is commonly used in this standard.

Foreword i Introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Technical requirements 6 Packaging, marking, storage and transportation 7 Sampling Annex A (Informative) Technical differences between this standard and ASTM standards and their causes

聚合物改性道路瀝青 1 范圍 本標準規定了用于道路工程的聚合物改性瀝青的分類、技術條件、貯存和運輸要求。 本標準適用于以熱塑性彈性體(SBS)、丁苯橡膠(SBR)、乙烯-醋酸乙烯共聚物(EVA)、聚乙烯(PE)為改性外摻材料制作的聚合物改性瀝青，滿足本標準系列指標的其他聚合物改性瀝青可參用本標準。 2 規范性引用文件 下列文件中的條款通過本標準的引用而成為本標準的條款。凡是注日期的引用文件，其隨后所有的修改單(不包括勘誤的內容)或修改版均不適用于本標準，然而，鼓勵根據本標準達成協議的各方研究是否可使用這些文件的最新版本。凡是不注日期的引用文件其最新版本適用于本標準。 GB/T 267 石油產品閃點與燃點測定法(開口杯法) GB/T 4507 石油瀝青軟化點測定法 GB/T 4508 石油瀝青延度測定法 GB/T 4509 石油瀝青針入度測定法 GB/T 5304 石油瀝青薄膜烘箱方法 GB/T 11147 石油瀝青取樣法 GB/T 11148 石油瀝青溶解度測定法 SH 0164 石油產品包裝、貯運及交貨驗收規則 SH/T 0735—2003 瀝青粘韌性試驗法 SH/T 0736—2003 瀝青旋轉薄膜烘箱試驗法 SH/T 0737—2003 瀝青彈性恢復測定法(延度儀法) SH/T 0738—2003 聚合物改性瀝青1，1，1-三氯乙烷溶解度測定法 SH/T 0739—2003 瀝青粘度測定法(布魯克菲爾德旋轉粘度儀法) SH/T 0740—2003 聚合物改性瀝青離析試驗法 3 術語和定義 3.1 熱塑性彈性體 Styrene-Butadiene-Styrene block copolymer 苯乙烯-丁二烯-苯乙烯嵌段共聚物，為熱塑性彈性體，有線型(非交聯型)和星型(交聯型)兩大類，均可用于瀝青改性。 3.2 丁苯橡膠 Styrene Butadiene rubber 丁二烯和苯乙烯共聚的、鏈節為無規分布的非結晶型彈性體，硫化后具有彈性。本標準中所指為乳液法合成的且未硫化的生膠。 3.3 乙烯-醋酸乙烯共聚物 Ethylene-Vinyl acetate copolymer 乙烯和醋酸乙烯共聚而成的樹脂。常用的為高壓本體聚合法產品。 3.4 聚乙烯 Polyethylene 乙烯單體在不同生產條件下均聚而成。本標準中常用的為高壓聚合的低密度聚乙烯。 4 分類 4.1 按改性材料的不同，本標準將聚合物改性瀝青分為SBS類(Ⅰ類)、SBR類(Ⅱ類)和EVA、PE類(Ⅲ類)。 4.2 按針入度和軟化點不同，本標準將Ⅰ、Ⅱ類聚合物改性瀝青分為A、B、C、D四個等級，Ⅱ類分為A、B兩個等級。 5 技術要求 聚合物改性道路瀝青的物理性能應符合表1的規定。 表1 聚合物改性道路瀝青技術要求