標準編號:	QJ 1354A-2005
中文名稱:	固體火箭發動機涂漆、外部標記及包裝通用技術要求
英文名稱:	General technical requirements for painting external marking and packing of solid rocket motos
中標分類:	V72    航天器動力系統
行業分類:	QJ    航天工業行業標準
ICS分類:	49.050 49.050    航空航天發動機和推進系統 49.050
發布日期:	2005-12-12
實施日期:	2006-5-1
標準狀態:	valid
替代舊標準:	QJ 1354-1988
翻譯語言:	英文
文件格式:	PDF
中文字符數:	7000 字
翻譯價格(元):	800.0
交付時間:	付款后 1~3 個工作日

General technical requirements for painting, external marking and packing of solid rocket motors 1 Scope This standard specifies the general technical requirements and inspection methods for painting, external marking and packaging of solid rocket motors. This standard is applicable to the painting, external marking and packing of solid rocket motors (hereinafter referred to as motors). 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies. GB 190 Packing symbol of dangerous goods GB 191 Packaging - Pictorial marking for handling of goods GB/T 3181-1995 Colour standard for paint film GB/T 5398 Test methods for large transport packages GB/T 14691 Technical drawings- Lettering GJB 2001 The safety requirements for package, transport and storage for initiating explosive device GJB 2711-1996 Test methods for military transport packages QJ 813A-1996 General specifications for painting QJ 990.3 Inspection methods for coatings - Inspection methods for coating thickness QJ 990.4 Inspection methods for coatings - Inspection methods for gloss of coatings QJ 990.14-1986 Inspection methods for coatings - Inspection methods for adhesion of coatings QJ 990.15 Inspection methods for coatings - Inspection methods for drying of coatings QJ 2847 Specification for wooden packaging box for mechanical product QJ 3069 Provisions on preparation of product serial no.

Foreword i 1 Scope 2 Normative references 3 General requirements 4 Painting 5 External marking 6 Packing