標準編號:	NY/T 1107-2020
中文名稱:	大量元素水溶肥料
英文名稱:	Water-soluble macronutrient fertilizers
行業分類:	NY    農業行業標準
發布機構:	中華人民共和國農業農村部
發布日期:	2020-07-27
實施日期:	2020-11-1
標準狀態:	valid
替代舊標準:	NY 1107-2010 大量元素水溶肥料
翻譯語言:	英文
文件格式:	PDF
中文字符數:	7000 字
翻譯價格(元):	540.0
交付時間:	付款后 1 個工作日

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009. This standard replaces NY 1107-2010 Water-soluble fertilizers containing nitrogen, phosphorus and potassium. In addition to a number of editorial changes, the following deviations have been made with respect to NY 1107-2010: ——This standard is changed from a mandatory standard to a voluntary standard; ——Appearance content requirement that "the liquid has no obvious precipitations and impurities, while the solid is divided into powder and particle, without obvious mechanical impurities.” is added; ——The division of the original product type: water-soluble macronutrient fertilizer (secondary nutrient type) and water-soluble macronutrient fertilizer (micronutrient type); ——The technical indexes of secondary nutrient and micronutrient are deleted; ——The content of macronutrient in liquid products of water-soluble macronutrient fertilizers is revised to ≥ 400g/L; ——The index of water insoluble matter content to ≤ 1.0% or ≤ 10g/L; ——The technical index with pH between 3.0 and 9.0 is deleted; ——Technical index requirements for chloridion content are increased; ——The limit of biuret content is increased in the technical index, which is ≤ 0.9%; ——The content that “if the solid macroelement water-soluble fertilizer product is in particle shape, the particle size index shall be measured and marked on the product packaging” is added; ——The content that “particle size shall be determined in accordance with those specified in NY/T 3036” is added in the test method; ——“Biuret content shall be determined according to Annex A of NY/T 2670-2020, and high-performance liquid chromatography shall be used as the arbitration method” is added in the test method. The content of sample weighing is specified; ——“Test method: the moisture content shall be determined in accordance with those specified in GB/T 8576 or GB/T 8577” is specified. "GB/T 8577 as arbitration method” is deleted; ——Technical index requirements, limited index requirements, instructions for use and precautions are added to the items specified in the product packaging label; ——The maximum inspection batch is changed to 500t; ——The indication value of sulfur content is deleted; ——Requirements for marking content is increased; ——The types and contents of secondary nutrients and micronutrients may be marked on the product packaging. This standard was proposed by and is under the jurisdiction of the Planting Industry Management Department, Ministry of Agriculture and Rural Affairs of the People's Republic of China. The previous editions of this standard are as follows: ——NY 1107-2006, NY 1107-2010. Water-soluble macronutrient fertilizers 1 Scope This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage for water-soluble macronutrient fertilizers. This standard is applicable to liquid or solid water-soluble fertilizers produced and sold within the territory of the People's Republic of China, which are mainly composed of macronutrients such as nitrogen, phosphorus and potassium, and can be added with appropriate amount of secondary nutrients or micronutrients. This standard is not applicable to fertilizer products with mandatory or recommended national or professional standards, such as compound fertilizer (complex fertilizer) and solid fertilizer made only by chemical methods. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies. GB 190 Packing symbol of dangerous goods GB/T 191 Packaging—Pictorial marking for handling of goods GB/T 6679 General rules for sampling solid chemical products GB/T 6680 General rules for sampling liquid chemical products GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 8569 Packing of solid chemical fertilizers GB/T 8576 Determination of free water for compound fertilizers—Vacuum oven method GB/T 8577 Determination of free water for compound fertilizers—Karl Fischer method GB 18382 Fertilizer marking—Presentation and declaration NY/T 887 Determination of the density of liquid fertilizers NY/T 1108 Liquid fertilizers—Tech-regulations of package NY 1110 Water-soluble fertilizers—Content-limits of mercury, arsenic, cadmium, lead and chromium NY/T 1117 Water-soluble fertilizers—Determination of calcium, magnesium, sulphur and chlorine content NY/T 1972 Water-soluble fertilizers—Determination of sodium, Selenium, silicon content NY/T 1973 Water-soluble fertilizers—Determination of water insoluble matter content and pH NY/T 1974 Water-soluble fertilizers—Determination of copper, iron, manganese, zinc, boron, molybdenum content NY/T 1977 Water-soluble fertilizers—Determination of total nitrogen, phosphorus and potassium content NY/T 1978 Fertilizers—Determination of mercury, arsenic, cadmium, lead and chromium content NY/T 1979 Fertilizers and soil amendments—Regulations of label and specification assessment NY/T 2670-2020 Urea ammonium nitrate solution and code of agricultural practice NY/T 3036 Fertilizers and soil amendments—Determination of moisture content and particle sizes Measures for the metrological supervision and administration of quantitatively packed commodities 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 water-soluble fertilizers liquid or solid fertilizers which are dissolved or diluted by water for fertigation, foliar fertilization, soilless culture, seed soaking and root dipping, etc. 4 Requirements 4.1 Appearance: uniform liquid or solid. The liquid has no obvious precipitations and impurities, while the solid is divided into powder and particle, without obvious mechanical impurities. 4.2 The technical indexes of solid and liquid products of water-soluble macronutrient fertilizers shall meet the requirements of Table 1 and the indication values of packaging marks. ? Table 1 Requirements of water-soluble macronutrient fertilizers Item Solid products Liquid products Macronutrient content a ≥50.0% ≥400g/L Water insoluble matter content ≤1.0% ≤10g/L Water (H2O) content ≤3.0% / Biuret content ≤0.9% Chloridion content b Products not labeled as "chlorine-containing” ≤3.0% ≤30g/L Products labeled as "chlorine-containing (low)” ≤15.0% ≤150g/L Products labeled as "chlorine-containing (medium)" ≤30.0% ≤300g/L a The content of macronutrients refers to the total N, P2O5, K2O. The product shall contain at least two of the macronutrients. The content of single macronutrient is not less than 4.0% or 40g/L. The absolute value of negative deviation between the measured value and the indication value of each single macronutrients shall not be greater than 1.5% or 15g/L. b Products with chloridion content greater than 30.0% or 300g/L shall be marked with "chlorine-containing (high)" on the packaging bag, and the chloridion content of products with "chlorine-containing (high)" may not be tested and judged. 4.3 The limit indexes of mercury, arsenic, cadmium, lead and chromium in water-soluble macronutrient fertilizers shall meet the requirements of NY 1110. 4.4 If secondary nutrients are added to the product, the content of single secondary nutrient and the total content of secondary nutrient contained in the product shall be indicated on the packaging label. ——Secondary nutrient content refers to the sum of calcium and magnesium nutrients. The product shall contain at least one secondary nutrient. ——The content of single secondary nutrient shall not be less than 0.1% or 1g/L. ——If the content of single secondary nutrient is lower than 0.1% or 1g/L, it shall not be included in the total content of secondary nutrient. ——If the indication value of single secondary nutrient is not greater than 2.0% or 20g/L, the absolute value of the negative relative deviation between the measured value and the indication value shall not be greater than 40%; if the indication value of single secondary nutrient is greater than 2.0% or 20g/L, the absolute value of the negative deviation between the measured value and the indication value shall not be greater than 1.0% or 10g/L. ? 4.5 If micronutrients are added to the product, the content of single micronutrient and the total content of micronutrient contained in the product shall be indicated on the packaging label. ——Micronutrient content refers to the sum of copper, iron, manganese, zinc, boron and molybdenum. The product shall contain at least one micronutrient. ——The content of single micronutrient shall not be less than 0.05% or 0.5g/L. The content of molybdenum is less than 0.5% or 5g/L. ——If the content of single micronutrient is lower than 0.05% or 0.5g/L, it shall not be included in the total content of micronutrient. If the indication value of single micronutrient is not greater than 2.0% or 20g/L, the absolute value of the positive and negative relative deviation between the measured value of each nutrient and its indication value shall not be greater than 40%; if the indication value of single micronutrient is greater than 2.0% or 20g/L, the absolute value of the positive and negative deviation between the measured value of each nutrient and its indication value shall not be greater than 1.0% or 10g/L. 4.6 If the solid water-soluble macronutrient fertilizer product is in particle shape, the particle size (1.00mm-4.75mm or 3.35mm-5.60mm) shall be ≥ 90%; particle size of products with special shape or larger particles (except powder) may be determined by agreement between the supplier and the purchaser. 5 Test methods 5.1 Appearance It shall be determined by visual inspection. 5.2 Determination of total nitrogen content It shall be determined in accordance with those specified in NY/T 1977. 5.3 Determination of phosphorus content It shall be determined in accordance with those specified in NY/T 1977. 5.4 Determination of potassium content It shall be determined in accordance with those specified in NY/T 1977.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 5 Test methods 6 Inspection rules 7 Marking 8 Packaging, transportation and storage

ICS 65.080 G 21 NY 中華人民共和國農業行業標準 NY/T 1107—2020 代替NY 1107—2010 大量元素水溶肥料 Water—soluble macronutrient fertilizers 2020-07-27發布 2020-11-01實施 中華人民共和國農業農村部 發布 前 言 本標準按照GB／T 1.1—2009給出的規則起草。 本標準代替NY 1107—2010《大量元素水溶肥料》。與NY 1107—2010相比，除編輯性修改外主要變化如下： ——由強制性標準改為推薦性標準。 ——增加外觀內容要求“液體無明顯沉淀和雜質。固體分粉狀和顆粒，無明顯機械雜質”。 ——刪除原產品類型大量元素水溶肥料(中量元素型)和大量元素水溶肥料(微量元素型)劃分。 ——刪除中量元素型技術指標和微量元素型技術指標。 ——大量元素水溶肥料液體產品的大量元素含量修改為≥400 g／L。 ——修改水不溶物含量指標為≤1.0％或≤10 g／L。 ——刪除pH在3.0～9.0的技術指標。 ——增加氯離子含量的技術指標要求。 ——技術指標中增加縮二脲含量限量為≤0.9％。 ——增加內容：固體大量元素水溶肥料產品若為顆粒形狀，需測定粒度指標，并在產品包裝上標識注明。 ——試驗方法增加內容：粒度測定按NY／T 3036的規定執行。 ——試驗方法增加內容：縮二脲含量的測定按NY／T 2670—2020附錄A的規定執行，以高效液相色譜法為仲裁方法。規定了稱樣量內容。 ——試驗方法：水分含量的測定按GB／T 8576或GB／T 8577的規定執行。刪除了“GB／T 8577為仲裁方法”。 ——產品包裝標簽載明項增加了技術指標要求、限量指標要求、使用說明和注意事項。 ——修改最大檢驗批量為500 t。 ——刪除硫元素含量的標明值。 ——標識內容要求增加。 ——中量元素和微量元素種類和含量可在產品包裝上標識注明。 本標準由農業農村部種植業管理司提出并歸口。 本標準所代替標準的歷次版本發布情況為： ——NY 1107—2006、NY 1107—2010。 大量元素水溶肥料 1 范圍 本標準規定了大量元素水溶肥料的要求、試驗方法、檢驗規則、標識、包裝、運輸和儲存。 本標準適用于中華人民共和國境內生產和銷售的，以大量元素氮、磷、鉀為主要成分的液體或固體水溶肥料，可以添加適量中量元素或微量元素。 本標準不適用于已有強制性或推薦性的國家或行業標準的肥料產品，如復混肥料(復合肥料)以及僅由化學方法制成的固體肥料。 2 規范性引用文件 下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB 190 危險貨物包裝標志 GB/T 191 包裝儲運圖示標志 GB/T 6679 固體化工產品采樣通則 GB/T 6680 液體化工產品采樣通則 GB/T 8170 數值修約規則與極限數值的表示和判定 GB/T 8569 固體化學肥料包裝 GB/T 8576 復混肥料中游離水含量的測定 真空烘箱法 GB/T 8577 復混肥料中游離水含量的測定 卡爾·費休法 GB 18382 肥料標識內容和要求 NY/T 887 液體肥料 密度的測定 NY/T 1108 液體肥料 包裝技術要求 NY 1110 水溶肥料 汞、砷、鎘、鉛、鉻的限量要求 NY/T 1117 水溶肥料 鈣、鎂、硫、氯含量的測定 NY/T 1972 水溶肥料 鈉、硒、硅含量的測定 NY/T 1973 水溶肥料 水不溶物含量和pH的測定 NY/T 1974 水溶肥料 銅、鐵、錳、鋅、硼、鉬含量的測定 NY/T 1977 水溶肥料 總氮、磷、鉀含量的測定 NY/T 1978 肥料 汞、砷、鉛、鎘、鉻含量的測定 NY/T 1979 肥料和土壤調理劑 標簽及標明值判定要求 NY/T 2670—2020 尿素硝酸銨溶液及使用規程 NY/T 3036 肥料和土壤調理劑 水分含量、粒度、細度的測定 定量包裝商品計量監督管理辦法 3 術語和定義 下列術語和定義適用于本文件。 3.1 水溶肥料 water-soluble fertilizers 經水溶解或稀釋，用于灌溉施肥、葉面施肥、無土栽培、浸種蘸根等用途的液體或固體肥料。 4 要求 4.1 外觀：均勻的液體或固體。液體無明顯沉淀和雜質。固體分粉狀和顆粒，無明顯機械雜質。 4.2 大量元素水溶肥料固體和液體產品技術指標應符合表1的要求，同時應符合包裝標識的標明值。 表1 大量元素水溶肥料的要求 項目 固體產品 液體產品 大量元素含量a ≥50.0% ≥400 g/L 水不溶物含量 ≤1.0% ≤10 g/L 水分(H2O)含量 ≤3.0% / 縮二脲含量 ≤0.9% 氯離子含量b 未標“含氯”的產品 ≤3.0% ≤30 g/L 標識“含氯(低氯)”的產品 ≤15.0% ≤150 g/L 標識“含氯(中氯)”的產品 ≤30.0% ≤300 g/L a 大量元素含量指總N、P2O5、K2O含量之和，產品應至少包含其中2種大量元素。單一大量元素含量不低于4.0%或40 g/L。各單一大量元素測定值與標明值負偏差的絕對值應不大于1.5%或15 g/L。 b 氯離子含量大于30.0%或300 g/L的產品，應在包裝袋上標明“含氯(高氯)”，標識“含氯(高氯)”的產品，氯離子含量可不做檢驗和判定。 4.3 大量元素水溶肥料中汞、砷、鎘、鉛、鉻限量指標應符合NY 1110的要求。 4.4 產品中若添加中量元素養分，須在包裝標識注明產品中所含單一中量元素含量、中量元素總含量。 ——中量元素含量指鈣、鎂元素含量之和，產品應至少包含其中一種中量元素。 ——單一中量元素含量不低于0.1％或1 g／L。 ——單一中量元素含量低于0.1％或1 g／L不計入中量元素含量總含量。 ——當單一中量元素標明值不大于2.0％或20 g／L時，各元素測定值與標明值負相對偏差的絕對值應不大于40％；當單一中量元素標明值大于2.0％或20 g／L時，各元素測定值與標明值負偏差的絕對值應不大于1.0％或10 g／L。 4.5 產品中若添加微量元素養分，須在包裝標識注明產品中所含單一微量元素含量、微量元素總含量。 ——微量元素含量指銅、鐵、錳、鋅、硼、鉬元素含量之和，產品應至少包含其中一種微量元素。 ——單一微量元素含量不低于0.05％或0.5 g／L。鉬元素含量不高于0.5％或5 g／L。 ——單一微量元素含量低于0.05％或0.5 g／L不計入微量元素含量總含量。 ——當單一微量元素標明值不大于2.0％或20 g／L時，各元素測定值與其標明值正負相對偏差的絕對值應不大于40％；當單一微量元素標明值大于2.0％或20 g／L時，各元素測定值與其標明值正負偏差的絕對值應不大于1.0％或10 g／L。 4.6 固體大量元素水溶肥料產品若為顆粒形狀，粒度(1.00 mm～4.75 mm或3.35 mm～5.60 mm)應≥90％；特殊形狀或更大顆粒(粉狀除外)產品的粒度可由供需雙方協議確定。 5 試驗方法 5.1 外觀 目視法測定。 5.2 總氮含量的測定 按NY／T 1977的規定執行。 5.3 磷含量的測定 按NY／T 1977的規定執行。 5.4 鉀含量的測定 按NY／T 1977的規定執行。 5.5 鈣含量的測定 按NY／T 1117的規定執行。 5.6 鎂含量的測定 按NY／T 1117的規定執行。 5.7 硫含量的測定 按NY／T 1117的規定執行。 5.8 銅含量的測定 按NY／T 1974的規定執行。 5.9 鐵含量的測定 按NY／T 1974的規定執行。 5.10 錳含量的測定 按NY／T 1974的規定執行。 5.11 鋅含量的測定 按NY／T 1974的規定執行。 5.12 硼含量的測定 按NY／T 1974的規定執行。 5.13 鉬含量的測定 按NY／T 1974的規定執行。 5.14 氯離子含量的測定 按NY／T 1117的規定執行。 5.15 鈉含量的測定 接NY／T 1972的規定執行。 5.16 pH的測定 按NY／T 1973的規定執行。 5.17 水不溶物含量的測定 按NY／T 1973的規定執行。 5.18 水分含量的測定 按GB／T 8576或GB／T 8577的規定執行。 5.19 粒度的測定 按NY／T 3036的規定執行。 5.20 液體肥料密度的測定 按NY／T 887的規定執行。結果用于液體產品質量濃度的換算。 5.21 汞含量的測定 按NY／T 1978的規定執行。 5.22 砷含量的測定 按NY／T 1978的規定執行。 5.23 鎘含量的測定 按NY／T 1978的規定執行。 5.24 鉛含量的測定 按NY／T 1978的規定執行。 5.25 鉻含量的測定 按NY／T 1978的規定執行。 5.26 縮二脲含量的測定 按NY／T 2670—2020附錄A的規定執行，以高效液相色譜法為仲裁方法。稱取0.2～2 g(精確至0.001 g)試樣用于測定。 6 檢驗規則 6.1 企業應該對產品進行檢驗。生產企業應保證所有的銷售產品均符合本標準的要求。每批產品應附有質量證明書，其內容按標識規定執行。 6.2 產品按批檢驗，以一次配料為一批，最大批量為500 t。 6.3 固體或散裝產品采樣按GB/T 6679的規定執行。液體產品采樣按GB/T 6680的規定執行。 6.4 將所采樣品置于潔凈、干燥的容器中，迅速混勻。取固體樣品1000 g或液體樣品1000 mL，分別分裝于2個潔凈、干燥的容器瓶中，密封并貼上標簽，注明生產企業名稱、批號或生產日期、采樣日期、采樣人姓名等。其中一瓶用于產品質量分析，另一瓶應保存至少2個月，以備復驗。 6.5 固體樣品經多次縮分后，取出約100g，將其迅速研磨至全部通過0.50 mm孔徑篩(如樣品潮濕，可通過1.00 mm的篩子)，混合均勻，置于潔凈、干燥的容器中，用于成分測定分析。顆粒形狀固體產品應另縮分出足夠樣品供粒度測定用。 6.6 液體樣品經多次播動后迅速取出約100 mL，置于潔凈、干燥的容器中，用于測定。 6.7 生產企業進行出廠檢驗時，如果檢驗結果有一項或一項以上指標不符合本標準要求，應重新自加倍采樣批中采樣進行復驗。復驗結果有一項或一項以上指標不符合木標準要求，則整批產品不應被驗收合格。 6.8 產品質量合格判定，采用GB/T 8170中“修約值比較法”。 7 標識 7.1 產品包裝標簽至少應載明：產品通用名稱、肥料登記證號、執行標準號、劑型、技術指標要求、限量指標要求、使用說明、注意事項、包裝規格、批號或生產日期、商標、企業名稱、生產地址、聯系方式等。 7.2 應注明大量元素含量之和的最低標明值和各單一大量元素含量的標明值。 7.3 產品中若添加中量元素養分，必須在包裝容器上標識注明產品中所含中量元素含量之和的最低標明值以及各單一中量元素含量的標明值。 7.4 產品中若添加微量元素養分，必須在包裝容器上標識注明產品中所含微量元素含量之和的最低標明值及各單一微量元素含量的標明值。 7.5 氯離子含量大于3.0%或30 g/L的產品，按照條款4.2的表1要求，應明確標識注明“含氯(低氯)”、“含氯(中氯)”或“含氯(高氯)”。 7.6 應注明鈉元素含量的標明值。 ——當鈉元素標明值為“鈉(Na)≤3.0%或30 g/L”時，其測定值應不大于3.0%或30 g/L。 ——當鈉元素標明值大于3.0%或30 g/L時，其測定值與標明值正負偏差的絕對值應不大于1.5%或15 g/L。 7.7 應注明pH的標明值。pH測定值與標明值正負偏差的絕對值不大于1.0。當pH的標明值小于3.0或者大于9.0時，需標識警示和專門使用說明。 7.8 顆粒狀固體產品粒度的最低標明值。粒度的測定值應符合其最低標明值要求。 7.9 產品不得含有國家明令禁止的添加物或添加成分。 7.10 若加入或標示含有其他添加物，生產者應有足夠的證據，證明添加物安全有效。應標明添加物的名稱和含量，不得將添加物的含量與養分相加。 7.11 產品外包裝上使用說明應包括但不限于以下內容：警示語(如“氯離子或鈉離子含量較高、含縮二脲，使用不當會對作物造成傷害”等)、注意事項、使用方法、適宜作物或適宜土壤(區域)及不適宜作物或不適宜土壤(區域)、建議使用量等。 7.12 其余應符合GB 18382和NY/T 1979的要求。 8 包裝、運輸和儲存 8.1 固體產品最小銷售包裝每袋(瓶)凈含量應不低于100 g；若進行分量包裝，應標明其凈含量；其余按GB／T 8569的規定執行。液體產品包裝按NY／T 1108的規定執行。凈含量按《定量包裝商品計量監督管理辦法》的規定執行。 8.2 在銷售包裝容器中的物料應混合均勻，不應附加其他成分小包裝物料。 8.3 產品運輸和儲存過程中應防潮、防曬、防破裂，警示說明按GB 190和GB／T 191的規定執行。