標準編號:	NB/T 47018.3-2011
中文名稱:	承壓設備用焊接材料訂貨技術條件 第3部分：氣體保護電弧焊鋼焊絲和填充絲
英文名稱:	Technical permission of welding materials for pressure equipment - Part 3: Steel electrodes and rods for gas shielded arc welding
行業分類:	NB    能源行業標準
發布機構:	中華人民共和國能源部
發布日期:	2011-7-1
實施日期:	2011-10-1
標準狀態:	superseded
被新標準替代:	NB/T 47018.3-2017 承壓設備用焊接材料訂貨技術條件 第3部分：氣體保護電弧焊絲和填充絲
被替代日期:	2017-8-1
替代舊標準:	JB/T 4747-2002 壓力容器用鋼焊條訂貨技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	280.0
交付時間:	付款后 1 個工作日

1 Scope This section of NB/T 47018 specifies the technical requirements for steel electrodes and rods for gas shielded arc welding of pressure equipment. This section is applicable to the carbon steel and low alloy steel electrodes and rods for gas shielded arc welding of pressure equipment. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment) applies. GB/T 2653 Bend Test Methods on Welded Joints GB/T 8110 Welding Electrodes and Rods for Gas Shielding Arc Welding of Carbon and Low Alloy Steel NB/T 47018.1 Technical Permission of Welding Materials for Pressure Equipment Section 1: General Rule JB/T 4730.2 Nondestructive Testing of Pressure Equipment-Part 2: Radiographic Testing

Foreword 1 Scope 2 Normative References 3 Technical Requirements 4 Longitudinal Bend Test of Deposited Metal 5 Marking