1 Scope
This standard specifies the design requirements for nuclear safety related steel structure for pressure water reactor nuclear power plant.
This standard is applicable to the design of nuclear safety related steel structure for pressure water reactor nuclear power plant; as for other nuclear facilities, this standard may also be implemented by reference.
This standard is not applicable to components maintaining pressure in nuclear facility, such as containment steel liners, pressure vessels, valves, pumps, pipelines as well as supports and hangers, and it is not applicable to steel structure in steel-concrete composite structure, neither.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 700-1988 Carbon Structural Steels
GB/T 1591-1994 High Strength Low Alloy Structural Steels
GB/T 3811-2008 Design Rules for Cranes
GB/T 5313 Steel Plates With through-thickness Characteristics
GB/T 11352 Carbon Steel Castings for General Engineering Purpose
GB 50017-2003 Code for Design of Steel Structures
GB 50205-2001 Code for Acceptance of Construction Quality of Steel Structures
HAF 003 Requirements for Quality Assurance and Safety of Nuclear Power Plants
HAD 003/06 Quality Assurance in the Design of Nuclear Power Plants
3 Terminologies and Definitions
For the purposes of this document, the following terminologies and definitions apply.
3.1
Load and action
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 General
5 Load-bearing Steel Structure Design
6 Design of Steel Linear and Anchoring System for Water Pool and Room
7 Design of Embedded Parts
Appendix A (Informative) Performance Table of Common Steels
Appendix B (Informative) Performance Table of Common Welding Materials
Appendix C (Informative) Performance Table of High-strength Bolt
References
