標準編號:	MH/T 6076-2012
中文名稱:	民用航空燃料設施設備浸潤沖洗質量控制
英文名稱:	Quality control for soaking and flushing of civil aviation fuel facilities and equipment
行業分類:	MH    民用航空行業標準
發布機構:	中國民用航空局
發布日期:	2012-3-26
實施日期:	2012-7-1
標準狀態:	superseded
被新標準替代:	MH/T 6076-2017 民用航空燃料設施設備浸潤沖洗質量控制
被替代日期:	2018-3-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	900.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the basic requirements for soaking and flushing of civil aviation fuel facilities and equipment (hereinafter referred to as facilities and equipment), the requirements for facility and equipment inspection, soaking, flushing, and record files. This standard is applicable to soaking and flushing of constructed, renovated, extended or newly purchased civil aviation fuel facilities and equipment. 2 Normative references The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 4756 Method for manual sampling of petroleum liquids MH/T 6002 The excellent equipment technical specification of civil aviation of fuel MH/T 6004 Oil metrology supervision of civil aviation MH/T 6020 Commercial aviation fuel quality control & operating procedures MH/T 6037 Washing commercial aviation fuel storage and transport equipment MHJ 5008 Technical code for the construction of civil airport fuel system API 1540 Design, construction, operation and maintenance of aviation fulling facilities API 1585 Cleaning guide for aviation fuel apron pipeline network ASTM D 4057 Standard practice for manual sampling of petroleum and petroleum products 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soak process of injecting civil aviation fuel that meets the specification and soaking the surface in contact with the fuel for a certain time before the constructed, renovated, extended or newly purchased facilities and equipment are officially put into use to dissolve the potential pollutants such as solvent, flux and grease Note: Facilities and equipment include pipelines and their accessories, fuel tanks (cabins) and their accessories, oil pumps, fuel trucks, etc. 3.2 confine space closed space without adequate ventilation, with barrier entrance and possible inhalation of harmful gas 3.3 height height more than 2m (inclusive) from the datum level and likely to fall

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Basic requirements 5 Facilities and equipment inspection 6 Soak 7 Flushing 8 Record files Annex A (Informative) Label for soaking and flushing of equipment Bibliography