1 Scope
This standard specifies the terms and definitions, model, technical requirements, test method, inspection rules and marking, packaging, transportation and storage of autobody and frame alignment machine (hereinafter referred to as alignment machine) for use of automobile repair.
This standard is applicable to various platform-type and frame-type autobody and frame alignment machines with the rated loading capacity no larger than 5000kg.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 3768 Determination of Sound Power Levels of Noise Sources - Survey Method
JB/T 8108.1 Short Link Chain for Lifting Purposes - General Conditions of Acceptance
JB/T 8108.2 Short Link Chain for Lifting Purposes - Grade T (8), Calibrated, for Chain Hoists and Other Lifting Appliances
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 Autobody and frame
The metallic external structure of automobile.
3.2 Rated loading capacity
The safe loading capacity of alignment machine.
3.3 Pulling tower
The device used for repairing the automobile deformation part through force application by hydraulic power mode.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Model
5 Technical Requirements
6 Test Method
7 Inspection Rule
8 Marking, Label and Operating Instruction
9 Packaging, Transportation and Storage
