1 General Provisions
1.0.1 This standard is formulated in order to specify the determination of properties and characteristic values of cement and cement concrete for highway engineering.
1.0.2 This standard is applicable to the property tests of cement and cement concrete for highway engineering.
1.0.3 The instrument and equipment applied in this standard are tested and approved by related national measuring departments and testing organization.
1.0.4 The national legal measure units apply this standard.
1.0.5 The sieve meshes adopted in this standard, except ones specified specially, all refer to square-mesh sieve.
1.0.6 The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
2 Terms and Symbols
2.1 Terms
2.1.1 Fineness
A parameter to indicate the fineness degree of cement. Express the fineness of cement specimen with specific surface area or percentage of the mass of sieve residue gained by specified sieve accounting for the original mass of the specimen.
2.1.2 Setting time
Time from adding water to losing plasticity of cement slurry
2.1.3 Soundness
A physical index to indicate the volume change uniformity after cement hardening. Redwood method indicates the cubical expansion of cement with the normal consistency, which is measured by the relative displacement of two touch needles. and Pat method indicates the cubical expansion of pat under the condition of the normal consistency of cement.
2.1.4 Normal consistency
It, consistency for short, is referred to the moisture addition when neat cement paste reaches the required consistency, and it is expressed by the percentage of cement mass and used to determinate the water consumption of cement slurry setting time and soundness.
2.1.5 Cement mortar
Mixture of cement, sand and water in a certain proportion. Cement may come with different types; sand may be standard sand or ISO Standard Sand; general water consumption changes with the various requirements.
2.1.6 Roller-compacted concrete
A harsh cement concrete shaped by vibroroller compacting.
2.1.7 Slump
Sinkage of new shaped concrete mixture under the deadweight action.
2.1.8 Slump spread
Contents
1 General Provisions
2 Terms and Symbols
3 Cement Testing
T 0501—2005 Test Method for Sampling of Cement
T 0502—2005 Test Method for Fineness of Cement--the 80μm Sieve
Annex T 0502 calibrating method of cement testing sieve
T 0503-2005 Standard Test Method for Cement Density
T 0504—2005 Method of Determination for Specific Surface of Cement--Blaine Method
T 0505—2005 Standard Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Portland Cements
T 0506—2005 Method of Testing Cements for Determination of Strength-ISO method
T 0507—2005 Test Method for Fluidity of Cement Mortar
Annex T 0507: shock table and its installation
T 0508—2005 Standard Test Method for Fluidity of Grout for Cement Mortar-Flow Cone Method
T 0509—2005 Standard Test Method for Fluidity of Grout for Cement Mortar (Ball＆ Canister Method)
T 0510—2005 Standard Test Method for Abrasion Resistance of Mortar Surfaces by Rotating-Cutter Method
Annex T 0510 Cement Mortar Abrasion Resistance Tester
T 0511—2005 Standard Test Method for Drying Shrinkage of Cement Mortar
T 0512—2005 1.5-hour Accelerated Strength Test by Accelerating-autoclaving Method for Cement Mortar
Annex T 0512 Establishment of strength deduced empirical equation of cement mortar and accuracy requirement
4 Test of Cement Concrete Mixture
T 0521—2005 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
T 0522—2005 Standard Test Method for Determination of the Consistency by Slump Apparatus
T 0523—2005 Standard Test Method for Determination of the Consistency--Vebe Test
T 0524—2005 Standard Test Method for Determination of the Consistency of Roll Compacted Concrete--Modified Vebe Test
T 0525—2005 Standard Test Method for Determination of Apparent Specific Density of Fresh Concrete
T 0526—2005 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
T 0527—2005 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
T 0528—2005 Standard Test Method for Bleeding of Freshly Mixed Concrete
T 0529—2005 Standard Test Method for Analysis the Constitute (Mix Proportion) of Concrete Mixture
5 Hardened Concrete Performance Test
T 0551-2005 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
T 0552-2005 Standard Practice for Making Roller-Compacted Concrete Specimens in the Laboratory
T 0553-2005 Standard Test Method for Compressive Strength of Cubic Concrete Specimens
T 0554-2005 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
T 0555-2005 Standard Test Method for Static Strength of Concrete in Compression of Prism Concrete Specimens
T 0556-2005 Standard Test Method for Static Modulus of Elasticity of Concrete in Compression of Prism Concrete Specimens
T 0557-2005 Standard Test Method for Static Modulus of Elasticity of Concrete in Compression of Cylindrical Concrete Specimens
T 0558-2005 Standard Test Method for Determination of Flexural strength of Concrete Specimens-Using Simple Beam with Third-Point Loading
T 0559-2005 Standard Test Method for Determination of Flexural Modulus of Concrete Specimens
T 0560-2005 Standard Test Method for Splitting Tensile Strength of Cubic Concrete Specimens
T 0561-2005 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
T 0562 – 2005 Standard Test Method for Compressive Strength of Hydraulic-Cement Concrete-using Portions of Prisms Broken in Flexure
T 0563-2005 1-hour Accelerated Strength Test by Accelerating-Autoclaving Method for Cement Concrete
T0564-2005 Standard Test Method for Fundamental Transverse Resonant Frequencies of Concrete Specimens
T 0565-2005 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
T 0566-2005 Standard Test Method for Drying Shrinkages of Cement Concrete
T 0567-2005 Standard Test Method for Abrasion Resistance of Concrete Surfaces
T 0568-2005 Standard Test Method for Permeation Resistance of Cement Concrete under Hydraulic Pressure
T 0569-2005 Standard Test Method for Permeation Depth of Cement Concrete under Hydraulic Pressure
T 0570-2005 Standard Test Method for Compressive Strength of Cubic Mortar Specimens
