標準編號:	JJF 1107-2003
中文名稱:	測量人體溫度的紅外溫度計校準規范
英文名稱:	Calibration Specification of Infrared Thermometers for Measurement of Human Temperature
中標分類:	A54    熱學計量
行業分類:	JJ    國家計量標準
發布機構:	國家質量技術監督局
發布日期:	2003-6-19
實施日期:	2003-6-29
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	500.0
交付時間:	付款后 1 個工作日

1 Scope This specification is applicable to the calibration of infrared thermometers for measurement of human temperature and infrared devices for instant screening of human skin temperature. 2 Normative references JJF 1001-1998 General terms in metrology and their definitions JJF 1007-1987 Temperature meteorological terms and their definitions (trial) JJF 1059-1999 Evaluation and expression of uncertainty in measurement GB/T 19146-2003 General requirements for infrared devices for instant screening of human skin temperature EN 12470-5: 2003 (E) Clinical thermometers - Part 5: Performance of infrared car thermometers (with maximum device) ASTM E 1965-98 Standard specification for infrared thermometers for intermittent determination of patient temperature For the purpose of this specification, the currently effective editions of the above normative references shall be used. 3 Terms and meteorological units 3.1 Terms 3.1.1 calibration mode (direct measurement mode) display mode for measurement or calibration of infrared thermometer, indicating the temperature without any correction, that is, the measurement result of blackbody temperature 3.1.2 estimation mode display mode for measurement of infrared thermometer, indicating the estimated temperature after correction of factors such as environmental temperature change, emissivity, and body position measured 3.1.3 laboratory error the difference between the uncorrected temperature measured by the blackbody calibrated infrared thermometer and the blackbody temperature under certain ambient temperature and humidity conditions

1 Scope 2 Normative references 3 Terms and meteorological units 4 General 5 Metrological characteristics 5.1 Temperature display range 5.2 Maximum permissible error 5.3 Ambient conditions 5.4 Display and interface 5.5 Probe protective cover 5.6 Thermometer identification and user manual 6 Calibration conditions 6.1 Ambient conditions 6.2 Standard and other equipment 7 Calibration items and methods 7.1 Calibration items 7.2 Calibration methods 8 Expression of calibration results 9 Re-calibration interval Annex A Assessment of uncertainty in calibration of infrared thermometer