標準編號:	JB/T 8876-2010
中文名稱:	滾動軸承 外球面球軸承鑄造座 技術條件
英文名稱:	Rolling bearings-Cast housings for insert bearings-Specifications
中標分類:	J11    滾動軸承
行業分類:	JB    機械行業標準
ICS分類:	21.100.20 21.100.20    滾動軸承 21.100.20
發布機構:	工業和信息化部
發布日期:	2010-02-11
實施日期:	2010-7-1
標準狀態:	valid
替代舊標準:	JB/T 8876-2000 滾動軸承 外球面球軸承鑄造座 技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	420.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the technical requirements, measurement methods, inspection rules, marking and packaging of cast housings for insert bearings. This standard is applicable to the cast housings whose boundary dimensions meeting the requirements of GB/T 7809 and JB/T 5302. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB/T 275-1993 Shaft and Housing Fits for Rolling Bearings GB/T 1184-1996 Geometrical Tolerancing-Geometrical Tolerance for Features without Individual Tolerance Indications (eqv ISO 2768-2: 1989) GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes-Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1: 1999, IDT) GB/T 4199-2003 Rolling bearings-Tolerances-Definitions (IS0 1132-1: 2000，Rolling bearings-Tolerances-Part1: Terms and definitions, MOD) GB/T 6930-2002 Rolling Bearings-Vocabulary (ISO 5593: 1997, IDT) GB/T 7809-1995 Rolling Bearings- Housings for Insert Bearing-Boundary Dimensions(eqv ISO 3228: 1993) GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging GB/T 9439-1988 Grey Iron Castings JB/T 5302-2002 Housings for Insert Bearings-Supplementary Structure-Boundary Dimensions

Contents Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Symbols 4.1 Plummer Block Housing 4.2 Flanged Housing 4.3 Take-up Housing 4.4 Annular Housing 5 Technical Requirements 5.1 Materials 5.2 Tolerance 5.3 Surface Roughness 5.4 Requirements for Casting 5.5 Others 6 Measurement Methods 7 Inspection Rules 8 Marking 9 Packaging, Storage and Transportation Appendix A (Normative) Measurement Methods A.1 Measurement of Tolerance A.2 Measurement of Surface Roughness