1 Scope
This Part of JB/T 8137 specifies materials, model and specification, basic technical requirements and inspection items of the steel delivery drums with corrugated plate (hereinafter referred to as "delivery drums").
This Part is applicable to the steel delivery drums with corrugated plate.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editions of the normative documents (including all the amendments) apply.
GB 912 Hot-rolled Sheets and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 3274 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
JB/T 8137.1-2013 Delivery Drums for Wires and Cables - Part 1: General Specifies
3 Materials
Foreword I
1 Scope
2 Normative References
3 Materials
4 Model
5 Specification Range
6 Basic Technical Requirements
6.1 Tolerance
6.2 Appearance Quality
6.3 Assembling
6.4 Bearing Load
6.5 Other Requirements
7 Inspection Items
Figure 1 Steel Delivery Drums with Corrugated Plate
Table 1 Model of the Delivery Drums
Table 2 Dimension Deviation of the Delivery Drums In mm
Table 3 Tolerances of Form and Position of the Delivery Drums In mm
Table 4 Hole Dimension
Table 5 Inspection Items and the Requirements
