Specifications of Flexible Graphite Sheets
柔性石墨板 技術條件
1 Scope
This part specifies the technical requirements, test methods and inspection rules of flexible graphite sheets.
This part is applicable to flexible graphite sheets as well as flexible graphite tape.
2 Normative References
The following normative documents contain provisions which, through reference in this part of JB/T 7758, constitute provisions of this part. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
JB/T 6622 Test Method for Cl Content in Flexible Graphite Sheets
JB/T 7758.3 Measurement for Sulfur Content of Flexible Graphite Sheets
JB/T 9141.1 Test Method for Density of Flexible Graphite Sheets
JB/T 9141.2 Test Method for Tensile Strength of Flexible Graphite Sheets
JB/T 9141.4 Test Method for Compressibility and Recovery of Flexible Graphite Sheets
JB/T 9141.5 Test Method for Ash in Flexible Graphite Sheets
JB/T 9141.7 Test Method for Loss of Weight by Heated of Flexible Graphite Sheets
3 Technical Requirements
3.1 The dimensional deviation of flexible graphite sheets shall be in accordance with those specified in Table 1.
Table 1 Dimensional deviation Limit of Flexible Graphite Sheets mm
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Packaging, Transport and Storage
6.1 Marking
6.2 Package
6.3 Transport and Storage
Table 1 Limit of Dimensional deviation of Flexible Graphite Sheets………………………….……
Table 2 Physical, Chemistry and Mechanical Performances of Flexible Graphite Sheets
