1 Scope
This standard specifies measuring methods for vibration (acceleration) of rolling bearing (hereinafter referred to as bearing).
This standard is applicable to DN 3mm~120mm deep groove ball bearing, angular contact ball bearing, tapered roller bearing and cylindrical roller bearing (Types N, NF, NU, NJ).
Foreword I
1 Scope
2 Terms, Definitions, Unit
2.1 Term and Definitions
2.2 Unit
3 Test Conditions
3.1 Instrument Requirements
3.2 Test Environment
3.3 Basic Status of Bearing
4 Test Method and Procedure
5 Test Results
