標準編號:	JB/T 2647-1995
中文名稱:	帶式輸送機 包裝技術條件
英文名稱:	Technical conditions for belt conveyer package
中標分類:	J81    輸送機械
行業分類:	JB    機械行業標準
發布機構:	機械工業部
發布日期:	1995-12-1
實施日期:	1996-7-1
標準狀態:	valid
替代舊標準:	JB 2647-1979 TD帶式輸送機 包裝技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	8000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Subject Contents and Application Scope This standard specifies the technical requirements of products before packing, technical requirements for case packing and nude packing, packing form of parts, technical requirements for packing case, accompanying technical documents, packing mark, acceptance rules and test methods for packing case in relation to belt conveyor. This standard is applicable to the transport packages of the belt conveyor products that are used for conveying various (blocks and particles) bulk materials and work pieces. 2 Normative References GB 191 "Packaging-Pictorial Marking for Handling of Goods" GB 326 "Paper Base Petroleum Asphalt Felt and Asphalt Paper" GB 1413 "Freight Containers--External Dimensions and Ratings" GB 1834 "Minimum Internal Dimensions for General Purpose Freight Containers" GB/T 4857.9 "Packaging—Complete, Filled Transport Packages—Water Spray Test" GB 4879 "Rustproof Packaging" GB 5398 "Test Methods for Large Transport Packages" GB/T 13384 "General Specifications for Packing of Mechanical and Electrical Product" 3 Technical Requirements of Products before Packing 3.1 The spare parts of belt conveyor product shall not be packed until they pass the inspection. 3.2 The packing list shall be formulated in accordance with the requirements of product design drawing and technological documents. The contents of packing list shall include the product name, spare part drawing No., quantity, packing form, case No. and weight, etc. 3.3 The surfaces of spare parts shall be cleared off oil stain, water and foreign bodies, the metallic finished surfaces shall be sealed up for rust protection according to the relevant requirements of "Rustproof Packaging" (GB 4879). 3.4 The pipe joints and flange joints on the product shall be blocked up with choke plugs, the external screw thread part shall be packed well with oil-immersed linen and be fastened up with iron wire, and corresponding the marks or serial numbers shall be made. The purchased parts, like steel wire rope, shall be oiled and be warped up with oilpaper or plastic paper.

1 Subject Contents and Application Scope 2 Normative References 3 Technical Requirements of Products before Packing 4 Technical Requirements for Case Packing and Nude Packing 5 Packing Form of Parts 6 Technical Requirements for Packing Case 7 Accompanying Technical Documents 8 Packing Mark 9 Acceptance Rules 10 Test Methods for Packing Case Additional Explanations: