標準編號:	JB/T 10239-2011
中文名稱:	滾動軸承 深溝球軸承用卷邊防塵蓋 技術條件
英文名稱:	Rolling bearings—Curled shields for deep groove ball bearings—Specifications
中標分類:	J11    滾動軸承
行業分類:	JB    機械行業標準
ICS分類:	21.100.20 21.100.20    滾動軸承 21.100.20
發布機構:	中華人民共和國工業和信息化部
發布日期:	2011-12-20
實施日期:	2012-4-1
標準狀態:	valid
替代舊標準:	JB/T 10239-2001 滾動軸承 深溝球軸承卷邊防塵蓋技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	280.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the technical requirements, detection methods, inspection rules, mark and packaging of curled shields for deep groove ball bearings (hereinafter referred to as shield). This standard is applicable to the production, inspection and acceptance of shield. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) is applicable to this document.

Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Symbols (see Figure 1) 5 Technical Requirements 5.1 Materials 5.2 Tolerance 5.3 Curled Slot with Elasticity 5.4 Surface Treatment 5.5 Appearance Quality 5.6 Other 6 Detection Methods 7 Inspection Rules 8 Mark 9 Rustproof Packaging and Storage Appendix A (Normative) Equant Slot Number