標準編號:	JB/T 10186-2010
中文名稱:	滾動軸承 組配角接觸球軸承 技術條件
英文名稱:	Rolling bearings - Specifications for matched angular contace ball bearings
中標分類:	J11    滾動軸承
行業分類:	JB    機械行業標準
ICS分類:	21.100.10 21.100.10    滑動軸承 21.100.10
發布機構:	中華人民共和國工業和信息化部
發布日期:	2010-2-11
實施日期:	2010-7-1
標準狀態:	abolished
作廢日期:	2017-05-12
替代舊標準:	JB/T 10186-2000 滾動軸承 組配角接觸球軸承 技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	9000 字
翻譯價格(元):	630.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the specifications for paired and multi-unite matched angular contact ball bearings (hereinafter referred to as matched bearings) with boundary dimensions consistent with GB/T 292-2007. This standard is applicable to the production, inspection, customer acceptance and application of matched bearings. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 272-1993 Rolling Bearing - Identification Code GB/T 275-1993 Shaft and Housing Fits for Rolling Bearings GB/T 292-2007 Rolling Bearings - Angular Contact Ball Bearings - Boundary Dimensions GB/T 307.2-2005 Rolling Bearings - Measuring and Gauging Principles and Methods (ISO 1132-2:2001, Rolling bearings-Tolerances - Part 2: Measuring and Gauging Principles and Methods, MOD) GB/T 307.3-2005 Rolling Bearings - General Technical Regulations GB/T 6930-2002 Rolling Bearings - Vocabulary (ISO 5593:1997, IDT) GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (ISO 15241:2001, IDT) GB/T 8597-2003 Rolling Bearings - Rust Proof Packaging GB/T 24605-2009 Rolling Bearings - Marking for Products GB/T 24608-2009 Rolling Bearings and Commercial Parts - Inspection Rules JB/T 2974-2004 Rolling Bearing - Identification Code - Supplemental Regulations

Contents Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Symbols 5 Matching Structural Type 6 Technical Requirements 7 Measuring Methods 8 Inspection Rules 9 Marking 10 Packaging Appendix A (Normative) Tolerances of Class 4A and Class 2A Appendix B (Informative) Fit between Matched Bearing with Tolerance Class of 5 or Above and Shaft or Housing