標準編號:	HG/T 3664-2015
中文名稱:	膠面膠靴(鞋)耐滲水試驗方法
英文名稱:	Test method for the resistance of all rubber boots(shoes) to water penetration
行業分類:	HG    化工行業標準
發布機構:	中華人民共和國工業和信息化部
發布日期:	2015-04-30
實施日期:	2015-10-1
標準狀態:	valid
替代舊標準:	HG/T 3664-2000 膠面膠靴(鞋)耐滲水試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	2000 字
翻譯價格(元):	100.0
交付時間:	付款后 1 個工作日

1 Scope This Standard specifies two test methods of the resistance of all rubber boots (shoes)to water penetration: air aeration method and immersion method. This Standard is applicable to resistance to water penetration test of all rubber boots (shoes) for various purposes. 2 Principle 2.1 Air aeration method Sealed rubber boot (shoe) is inflated with certain-pressure compressed air and then immerged in the sink, and over time inspected for bubbling on its surface. If it is free form bubbling, the rubber boot (shoe) passes the resistance to water penetration test. 2.2 Immersion method The tested rubber shoe (boot) is submerged, after immersion for a while, taken out and inspected for water seeping into inside. In case of no water penetration into the shoe (boot), it passes the resistance to water penetration test.

Foreword I 1 Scope 2 Principle 3 Equipment 4 Specimen 5 Test Method and Procedure 6 Test Result and Description 7 Test report