1 Scope
This standard specifies the determination of pull-out force of upper bands from bottom of rubber/plastics slippers or sandals which are manufactured by cold bonding or assembling process.
This standard specifies Method A and Method B for testing. Method A is applicable to the determination of pull-out force of upper bands of slippers or sandals manufactured by cold bonding process. Method B is applicable to the determination of pull-out force of upper bands of slippers or sandals manufactured by assembling process.
2 Normative References
The following document for the application of this document is essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 16825.1 2008 Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-measuring System
3 Terminology and Definition
For the purposes of this document, the following terminology and definition apply.
3.1
Pull-out force of upper bands
The force required to pull the upper bands out from the bottom of shoes according to specified method.
Foreword i
1 Scope
2 Normative References
3 Terminology and Definition
4 Principle
5 Test Apparatuses
6 Test Sample
7 Test Procedure
8 Test Result
9 Test Report
