標準編號:	HG/T 21519-2005
中文名稱:	垂直吊蓋板式平焊法蘭人孔
英文名稱:	Slip-on-welding Plate Flange Manholes with Davit to Vertical Cover
行業分類:	HG    化工行業標準
發布日期:	2005-7-10
實施日期:	2006-1-1
標準狀態:	superseded
被新標準替代:	HG/T 21519-2014 垂直吊蓋板式平焊法蘭人孔
被替代日期:	2014-11-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	8000 字
翻譯價格(元):	560.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the types, basic parameters, dimensions, technical requirements and relevant service requirements of slip-on-welding plate flange manholes with davit to vertical cover made of carbon steel and stainless steel. This standard is applicable to slip-on-welding plate flange manholes with davit to vertical cover of which the nominal pressure PN is less than or equal to 0.6MPa, the working temperature and the corresponding maximum non-impact working pressure are limited within the range specified in Table 3-2 according to material category. 2 Normative References GB/T 41-2000 Hexagon Nuts - Product Grade C GB/T 95-2002 Plain Washers - Product Grade C HG 20593-1997 Slip-on-welding Plate Steel Pipe Flanges (European System) HG 20601-1997 Steel Pipe Blank Flanges (European System) HG 20606-1997 Nonmetallic Flat Gaskets for Steel Pipe Flanges (European System) HG 20607-1997 PTFE Envelope Gasket for Steel Pipe Flanges (European System) HG 20613-1997 Fasteners for Steel Pipe Flanges (European System) HG/T 21514-2005 Type and Technical Specifications of Steel Manhole and Handhole 3 Types, Basic Parameters and Dimensions

1 Scope 2 Normative References 3 Types, Basic Parameters and Dimensions 4 Technical Requirements 5 Marking Examples