1.0.1 This provision is the technical provisions established for adopting programmable controller (PC-Programmable Controller, PLC-Programmable Logic Controller etc. hereafter referred to as PLC) in chemical instrumentation design.
1.0.2 This provision is applicable to the PLC engineering design of new build chemical companies; the application scope is as follows:
Establish the PLC executive solution in the monitoring application in industrial process;
Determine the basic configuration of PLC hardware system;
Prepare PLC technical specification;
Prepare letter of PLC inquiry;
Submit external design information applied by PLC;
Accomplish the design information required by programming of PLC application software;
Installation and technical service of PLC equipments;
Extension and reconstruction engineering may be implemented in reference of this provision according to the practical application conditions;
The built-in programming software of PLC and internal connection of system are not included in this provision.
1.0.3 Relevant codes are as follows:
HG/T 20505 "Functional identification and symbols for process measuring and controlling instrumentation"
HG/T 20508 "Design code for control room"
HG/T 20509 "Design code for instrument power supply system"
HG/T 20512 "Design code for instrument tubing and wiring"
HG/T 20513 "Design code for instrument grounding"
During the implementation of this provision, the provisions of current relevant national code shall be conformed too.
1 General Provisions
2 PLC Engineering Design Procedure
3 Application Scope of PLC
4 Hardware Configuration of PLC
5 Software Configuration of PLC
6 Enquiry, Quotation and Evaluation of PLC
7 Programming of PLC Application Software
8 Acceptance of PLC
9 Requirements of PLC Central Control Room, Power Supply, Site Wiring and Grounding Design
Appendix A Preparation Outline of PLC Technical Specification
Explanation of Wording in This Code
