標準編號:	HG/T 20636.9-1998
中文名稱:	自控專業工程設計文件的校審提要
英文名稱:	Checking list for review and approval for engineering design of instrumentation
中標分類:	P94    金屬設備與工藝管道安裝工程
行業分類:	HG    化工行業標準
ICS分類:	25.040.40 25.040.40    工業過程的測量與控制 25.040.40
發布日期:	1998-6-22
實施日期:	1999-1-1
標準狀態:	superseded
被新標準替代:	HG/T 20636.6-2017 化工裝置自控專業設計管理規范 自控專業工程設計文件的校審提要
被替代日期:	2018-4-1
翻譯語言:	英文
文件格式:	PDF
中文字符數:	13000 字
翻譯價格(元):	400.0
交付時間:	付款后 1 個工作日

1.0.1 This provision is an audit requirement of the engineering design document in the engineering design stage of instrumentation, is also a guidance document for design review and Verification and plays an important part in ensuring the quality of engineering design document. 1.0.2 This provision is applicable to proofreading of instrumentation engineering design documents and proofreading of design documents relevant to feasibility study, foundation design/preliminary design . 1.0.3 Relevant standards are listed as follows: HG / T 20636.8 "produce of quality assurance for engineering design of instrumentation" HG / T 20637.1 "Composition and preparation for engineering documents of instrumentation" HG / T 20637.2 "Symbols and identifiers for engineering design of instrumentation" HG / T 20637.3 "Preparation of instrumentation engineering specification" HG / T 20637.4 "Preparation of requirements for instrumentation construction and erection" HG / T 20637.5 "Preparation of instrumentation requisition" HG / T 20637.6 "Preparation of instrumentation specification" HG / T 20637.7 "Materials take-off of instrumentation" HG / T 20637.8 "Numbering of auxiliary equipment, cables and tubes" HG / T 20637.8 "Specification for Details of Engineering Design of Instrumentation" HG / T 20639.2 "Typical design information sheets for engineering design of instrumentation" HG 20505 "Functional identification and symbols for process measuring and controlling instrumentation" HG / T 20573 "Code for Distributed Control System Engineering Design" During the implementation of this provision, the provisions of current relevant national standard shall be conformed too.

1 General Rules 2 Job Responsibilities of Proofreading 2.1 Responsibilities of persons in charge of proofreading 3 Basic Requirements for Proofreading 3.1 Design principles and design schemes 3.2 Standard and regulation 3.3 Profundity of the design document content 3.4 Submitting and accepting documents 3.5 Cost control of instrumentation engineering 4 Content Proofreading of Design Documents 4.1 Proofreading of written document 4.2 Proofreading of tabular document 4.3 Proofreading drawing document 4.4 Proofreading of DCS design document