This standard specifies the certification rules and procedures of wind turbine generator system, and describes the procedure of evaluation for conformity and the management principle in detail. During evaluation for conformity, certification for safety, reliability, performance, testing and power grid compatibility of wind turbine generator system will be carried out according to relevant standards and technical requirements.
This standard is applicable to wind turbine generator system of any type and size.
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Symbols and Abbreviations
4.1 Symbols
4.2 Abbreviations
5 Acceptance of Operating Bodies
5.1 General
5.2 Accreditation
5.3 Mutual Recognition Agreement
6 Management of Certification System
6.1 General
6.2 Agreement on Certification
6.3 Issue of Certificates and Conformity Statements
6.4 Preservation of Relevant Documentation
6.5 Maintenance and Expiration of Certificates
6.6 Corrective Actions
7 Content of Certification
7.1 General
7.2 Design Certification
7.3 Type Certification
7.4 Project Certification
7.5 Component Certification
8 Design Certification
8.1 General
8.2 Design Basis Evaluation
8.3 Design Evaluation
9 Type Certification
9.1 General
9.2 Type Testing
9.3 Tower Foundation Design Evaluation
9.4 Performance Testing
9.5 Final Evaluation
9.6 Type Certificate
10 Project Certification
10.1 General
10.2 Site Evaluation
10.3 Design Basis Evaluation
10.4 Entirety Load Analysis
10.5 Design Evaluation of Site-specific Wind Turbine Generator System/RNA
10.6 Design Evaluation of Site-specific Supporting Structure
10.7 Other Installation Design Evaluation
10.8 Wind Turbine Generator System/RNA Surveillance
10.9 Supporting Structure Manufacturing Surveillance
10.10 Other Installations Manufacturing Surveillance
10.11 Project Performance Test
10.12 Transportation and Installation Surveillance
10.13 Commissioning Surveillance
10.14 Final Evaluation
10.15 Project Certificate
10.16 Operation and Maintenance Surveillance
Appendix A (Informative) Design Documentation
Appendix B (Informative) Example Formats
B.1 Design Certificate Example Format
B.2 Type Certificate Example Format
B.3 Design Evaluation Conformity Statement Example Format
B.4 Type Test Conformity Statement Example Format
B.5 Manufacturing Conformity Statement Example Format
B.6 Foundation Design Evaluation Conformity Statement Example Format
B.7 Type Characteristics Measurements Conformity Statement Example Format
B.8 Project Certificate Example Format
B.9 Site Assessment Conformity Statement Example Format
B.10 Foundation Design Conformity Statement Example Format
B.11 Installation Conformity Statement Example Format
B.12 Operation and Maintenance Surveillance Conformity Statement Example Format
B.13 Component Certificate Example Format
Appendix C (Normative) Minimum Requirements for Load Measurements
Appendix D (Normative) Requirements for Safety and Function Testing
Appendix E (Normative) Duration Tests for Small Wind Turbines
