1 Scope
This Standard specifies classification, dimension, mass, permissible deviation, technical requirements, test methods, inspection rules, packing and marking, and requirements for quality certificate of stainless steel wire ropes.
This Standard is applicable to stainless steel wire ropes (hereinafter referred to as rope) used in purposes of instrument and mechanical transmission, stay rope, slung, shock absorber damping, etc.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. Parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable.
GB/T 2104 Steel Wire Ropes - Packing, Marking and Certificate - General Requirements
GB/T 4240 Stainless Steel Wires
GB/T 8358 Method of Breaking Tensile Test for Steel Wire Ropes
GB/T 8706 Steel Wire Ropes - Vocabulary
GB/T 8707 Steel Wire Ropes - Standard Designation
GB/T 12347-1996 Steel Wire Ropes - Bending Fatigue Testing
3 Terms and Definitions
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Dimensions and Masses
6 Technical Requirements
7 Test Method
8 Inspection Rules
9 Packaging, Marking and Quality Certificate
Appendix A (Normative) Construction Diagrams of Stainless Steel Wire Ropes
