標準編號:	GB/T 985.2-2008
中文名稱:	埋弧焊的推薦坡口
英文名稱:	Recommended Joint Preparation for Submerged Arc Welding
中標分類:	J33    焊接與切割
行業分類:	GB    國家標準
ICS分類:	25.160.01 25.160.01    焊接、釬焊和低溫焊綜合 25.160.01
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2008-03-31
實施日期:	2008-9-1
標準狀態:	valid
替代舊標準:	GB 986-1988 埋弧焊焊縫坡口的基本形式和尺寸 GB/T 986-1988 埋弧焊焊縫坡口的基本形式和尺寸
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	120.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 985 specifies forms and sizes of joint preparation groove steels welding. This part is applicable to technological process for submerged arc welding. 2 Normative references The following documents contain provisions which, through reference in this part of GB/T 985, constitute provisions of this part. For dated reference, subsequent amendments to, or revision of, any of these publications do not apply. All standards are subject to revision, and parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of this part indicated below. For undated references, the latest edition of this part referred to applies.